Kennedy SDS-Style Fitting Hammer Drill Bits

Kennedy Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.

SDS-Plus Hammer Drill Bit

Allied Maxcut Series 1 and 1.5 Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A HSS Super Cobalt AM200 Coated

Iscar Carbide Endmills

ISCAR is introducing 38 helix endmills with variable pitch for roughing and finishing operations. The new EC?CF solid endmills feature excellent chatter dampening ability, due to their variable pitch. The new solid endmills are available in 6 to 20mm.

These new endmills are an excellent solution for low power machines with ISO40 or BT40 adaptations, improving their material removal rate and eliminating vibration.They can be used for up to 2XD full slot machining of alloy and stainless steel, titanium and exotic materials.

ISCAR?s new CHATTERFREE endmills maximise stock removal rate and reduce cycle time in most milling operations. Their unique ground geometry provides excellent surface finish and long tool life while machining at high material removal rates.

CHATTERFREE EC-E4L...CF 38 Helix Carbide Endmills 4 Flute

Kennedy® Stub Length Drills Carbide

For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.

Tolerances:
Cutting Dia. plus 0.000mm - 0.015mm.
Shank Dia. plus 0.000mm - 0.030mm.

Kennedy® Carbide Stub Length Drills - Metric

Guhring GT100 Jobber Drills HSS

HSS GT100 jobber drills. For drilling in difficult conditions when swarf congestion prevents an adequate flow of coolant. For use in steel and cast iron having a hardness of up to 1000N/mm2. Not recommended for nickel-chrome steels or similar material. Manufactured to BS 328/DIN 338.

Series 549 - Metric

Pinzbohr Modular Boring System Heads

Simultaneous movement of both slide-blocks on rough boring heads. Inner pre-load device between body and slide block on finish boring heads. Override device on adjusting screw in rough boring heads. Few boring head components. Simple adjusting and locking mechanism. Setting diameter with boring head mounted in machine tool using micrometer or caliper. After setting to the required diameter it prevents slide block from moving while tightening lock screw. Prevents adjusting screw from stripping threads; very easy and fast to adjust. Precision machined components. Made from chrome nickel alloy tool steel. Modular components - simple yet secure coupling system. Large adjusting ranges on rough and finish boring heads. Rough and finish boring heads for many insert styles. High accuracy and repeatability. Very rugged - excellent durability. Components remain securely locked even under severe machining conditions.

75 and 90 Rough Boring and Finish Boring Heads:
Dual insert head design for heavy duty roughing. 12 different head sizes cover a diameter range from 24 to 500mm. Integral insert pocket design for head sizes 22 - 54. Insert cartridge design for head sizes 68 - 500. Heads and cartridges available for up to 5 different insert styles (MC.., CC.., CN.., TC.., WC..). Simultaneous adjustment of the slide blocks. Override device to prevent stripping of adjusting screw. Micrometer adjustment on large boring heads, with 0.01mm increments. Cartridges have own radial adjusting screw for individual setting of cartridges. Change to different lead angle or insert style by simply exchanging cartridges.

Cartridge Design for Heads Size 68 ? 500mm:
Cartridges available for 5 different insert styles (MC.., CC.., CN.., TC.., WC..) Cartridges available with 75 and 90 lead angle, equipped with a radial adjusting screw for setting centrality or radial stagger. Available in pairs for symmetric or axial staggered insert set-up.

Sherwood Reduced Shank Drills (Blacksmiths) - 1/2" Parallel Shank HSS

General-purpose drills for light duty work, for drilling steels, cast iron, nickel brass and graphite. Reduced parallel shank 1/2". Point angle 118, helix angle: normal, web thickness: standard, tolerance of diameter: h8, tolerance of shank: -0.01/0.08. Manufactured to BS328. Fracturing of the drill shank may occur if it is used for any other purpose or if extreme pressure is exerted on the drill.

For all dimensional specifications please refer to our catalogue.

Metric

All sizes will fit into a 13mm/1/2" chuck.

SwissTech 2 Flute Ball Nose Slot Drills Weldon Shank HSS-Co 8%

Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6. Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).

For all dimensional specifications please refer to our catalogue.

Series 12 Long SBN-2WL TiCN Coated

Dimensions to DIN 844.

Dormer Taps

Dormer MTT-X Series taps are manufactured from HSS-X1 Steel with a Bright finish, they are right Hand Cutting.

Manufactured to ISO 529
Spiral Flute for threading blind holes.
Taper lead to DIN form C.
Tapping tolerance to 6H.
Max Depth 2.5 x D.
Helix angle 48.

For all technical and dimensional specifications please refer to our catalogue.

MTT-X Series E003 Spiral Flute Metric Tap HSS-X1

AC3000 Carbide Grade (P20 - P40, M20 - M40)

Al2O3 Coated Grade
Designed for interrupted cuts of steels and stainless.

T-Rex TRM55 Carbide Insert

Chip Breaker:
LU Type Finishing Breaker
DOC 0.25mm-1.75mm
Fz 0.025-0.4mm/rev

Grade Description: AC3000 (Steels) Tough grade for heavy roughing, interrupted cuts and high temperature alloys.