Sherwood Drills Taper Shank HSS

General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.

For all dimensional specifications please refer to our catalogue.

Series T100 (MT2) - Metric

Dormer Stub Drills

A920 - HSCo PFX Stub Drills
High productivity "one-hit" drilling to 3xD. Excellent performance across a wide range of materials. Parabolic flute design promotes constant chip flow.Size Range: 1.0-20.0mm. Manufactured to BS 323, DIN1897, ansi.

A920 - HSCo PFX Stub Drills - metric

Allied Maxcut Series 3 Holders

Diameter range: 34.34 to 47.80mm.

For all dimensional specifications please refer to our catalogue.

Taper Shank

Guhring Machine Chucking Reamers Intermediate Diameter HSS-E

Available in diameters ranging from 2mm to 10mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 and DIN 2172 section 1.

Shank diameter equals cutting diameter - 0.025mm.
dia 2.00 - dia 2.65 / dia 2.66 - dia 10.00 H9.

Diameter Tolerances (to H7)
Up to 5.5mm: plus 0.004mm minus 0.000mm
Above 5.5mm: plus 0.005mm minus 0.000mm.

Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

For all technical specifications please refer to our catalogue.

Indexa-Seiki? Lever Lock External Toolholders

For further technical and dimensional specifications please refer to our catalogue.

PDJN - Right Hand

93 Approach for negative 55 rhombic inserts.

Guhring Slot Drills

Short rigid slot drills to suit all general-purpose profiling applications, including alloyed steels, stainless steels and non-ferrous materials. Centre cutting with a unique Fire coating that is applied in Guhring's own coating plants using the PVD process. This all-around performance coating can achieve two to three times the performance of TiN, and considerably better than TiALN. It has excellent heat resistance as well as high toughness, therefore it is well-suited for interrupted cutting.

For all dimensional and technical specifications please refer to our catalogue.

Series 3670 4 Flute Slot Drills

Carbide Grade AC2000 (P15 - P30)

Al2O3 Coated Grade
For general to rough cutting of steels.

NGU Chipbreaker

Application: medium materials.

SPKN

QM3535 (P20 - P35) PVD TiAIN Coated for milling of steel.
Comprehensive grade which covers wide application range due to substrate providing optimal wear resistance and toughness.

1203

OFKR

QP25C (ISO P10-P35) CVD Coated. Milling grade for Steels and some Stainless Steels.

704

To suit: Indexa Seiki 8T Profile type Face Mills

Sherwood 2 Flute Ball Nose Slot Drills Threaded Shank HSS

Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

For all dimensional and technical specifications please refer to our catalogue.

Long Series Type B230T - Metric