Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? SCLCR boring bar and 10 Dijet CCMT inserts.

SCLCR Boring Bar and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert Set consists of 1x SCLCR screw on style boring
bar and 10x CCMT inserts.
S08K SCLCR 06 - Right Hand
95 approach for 7 positive.
80 rhombic inserts.
0.05 - 0.3mm/rev.
D.O.C.: 0.25 - 2mm.


Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Taper Neck

Dijet Milling Inserts

Grade Description: JC610 (K05-25)
CVD coated grade having excellent
wear-resistance & crack-resistance. General grade for grey cast iron & ductile cast iron.

SGHN Indexable Milling Inserts

Industrial Drill Chuck Arbors.

Precision machined, fully hardened & ground to give maximum surface contact.

Dijet Milling Inserts

Alu-RDHT inserts polished for machining aluminum.

Grade description: KT9 (K05-K15) Uncoated. Suitable for cast iron, aluminium, copper alloys and other
non-ferrous materials.

For all technical specifications and tool holders please refer to our catalogue.

Milling Inserts

Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Taper Neck

Dijet Mirror Ball Cutters

Spare screws for Mirror Ball Cutters.

For all dimensional specifications please refer to our catalogue.

Dijet Inserts

Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).

For all dimensional and technical specifications please refer to our catalogue.

Peripheral Inserts (P15-P35 M15-M40)

For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.

Dijet Modular Head End Mill Shank Type

The Dijet MSN carbide threaded arbor is for use with Diemaster? MDH modular end mill heads. The Carbide shank combination gives highly efficient machining for deep applications increasing productivity rigidity. Through coolant hole.

For all technical specifications and Diemaster? MDH modular end mill heads please refer to our catalogue.

MSN Carbide Shank Holder - End Mill Shank Type (Through Coolant Hole)

Dijet Mirror Ball Cutter Inserts

Available in several grades.

For further specifications please refer to our catalogue.

BNM