Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Straight Neck

CCMT

JC215V (ISO P10-P40 K25-K40)
On the wear-resistance and tougher base material, Multi-layer coating are adopted. This grade shows twice the tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron.
FT - Excellent swarf control can be obtained at small depth of cut and low feed rate. Excellent finish to work-surface is achievable. This fine finishing chipbreaker offers an optimum for high-speed cutting when used with Cermet Grade inserts.

Dijet 3 Flute 45 Helix Slot Drills for Aluminium Plain Shank Carbide

For profiling, slotting and drilling with special geometry for aluminium, copper alloys and other non-ferrous materials. Very sharp edges for smooth action in soft materials minimising chip sticking to the edge. Centre cutting for drilling.

For all dimensional and technical specifications please refer to our catalogue.

3 Flute Long Shank Series

Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? SCLCR boring bar and 10 Dijet CCMT inserts.

SCLCR Boring Bar and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert Set consists of 1x SCLCR screw on style boring bar and 10x CCMT inserts.
S16R SCLCR 09 - Right Hand
95 approach for 7 positive.
80 rhombic inserts.
0.05 - 0.3mm/rev.
D.O.C.: 0.25 - 2mm.

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

Dijet Modular Head End Mill Shank Type

The Dijet MSN carbide threaded arbor is for use with Diemaster? MDH modular end mill heads. The Carbide shank combination gives highly efficient machining for deep applications increasing productivity rigidity. Through coolant hole.

For all technical specifications and Diemaster? MDH modular end mill heads please refer to our catalogue.

MSN Carbide Shank Holder - End Mill Shank Type (Through Coolant Hole)

Spare Reverse Clutches

To suit Indexa-Seiki tapping heads.

Dijet Mirror Ball Indexable Ball Nose End Mills

MBN Modular Head for high speed cutting. Suitable for face milling, copy milling, pocket milling, helical milling and shoulder milling.

For all dimensional and technical information please refer to our catalogue.

MBN

Dijet Mirror Ball Cutter Inserts

Available in several grades.

For further specifications please refer to our catalogue.

BNM