产品 / 切削工具
编号：DIJ1611017H
●产品描述：
Dijet Carbide End Mills
Dijet AL-SEELS series End Mills are for profiling & Slotting in Aluminium and Alloys
AL-SEEL-2 Long Series Carbide End Mill
Dijet AL-SEELS series Carbide end mill specification:
Sharp corner.
Helix angle 45.
2 flute.
Centre cutting.
Regular cutting edge.
Shank cutting diameter to 0.04-0.0
Weldon shank to DIN 1835B.
编号：DIJ1228923B
●产品描述：
Dijet Inserts
Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).
For all dimensional and technical specifications please refer to our catalogue.
Peripheral Inserts (P15-P35 M15-M40)
For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.
编号：DIJ1611019K
●产品描述：
Dijet Carbide End Mills
Dijet AL-SEELS series End Mills are for profiling & Slotting in Aluminium and Alloys
AL-SEEL-2 Long Series Carbide End Mill
Dijet AL-SEELS series Carbide end mill specification:
Sharp corner.
Helix angle 45.
2 flute.
Centre cutting.
Regular cutting edge.
Shank cutting diameter to 0.04-0.0
Weldon shank to DIN 1835B.
编号：DIJ1611622M
●产品描述：
Dijet 3 Flute 45 Helix Slot Drills for Aluminium Plain Shank Carbide
For profiling, slotting and drilling with special geometry for aluminium, copper alloys and other non-ferrous materials. Very sharp edges for smooth action in soft materials minimising chip sticking to the edge. Centre cutting for drilling.
For all dimensional and technical specifications please refer to our catalogue.
3 Flute Long Shank Series
编号：DIJ1203030J
●产品描述：
CCMT
JC215V (ISO P10-P40 K25-K40)
On the wear-resistance and tougher base material, Multi-layer coating are adopted. This grade shows twice the tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron.
FT - Excellent swarf control can be obtained at small depth of cut and low feed rate. Excellent finish to work-surface is achievable. This fine finishing chipbreaker offers an optimum for high-speed cutting when used with Cermet Grade inserts.
编号：DIJ1226220P
●产品描述：
Dijet Milling Inserts
Grade description: JC5040 (P15-P35 M15-M40) Coated grade for RDHX inserts, mould making and diesinking applications in a wide variety of steels including tool steels, ferritic and martensitic stainless steels.
RDHX Inserts
To suit Dijet Diemaster End & Face Mills
编号：DIJ1227440M
●产品描述：
Dijet Milling Inserts
Grade Description: JC5030 (ISO P15 - K20 TiALN PVD Coated)
Giving longer tool life. For high speed cutting carbon steel, alloy steel and die steel.
SGHN Indexable Milling Inserts
编号：DIJ1611214D
●产品描述：
Dijet Carbide End Mills
Dijet AL-SEELS series End Mills are for profiling & Slotting in Aluminium and Alloys
AL-SEES-2 Standard Series Carbide End Mill
Dijet AL-SEELS series Carbide end mill specification:
Sharp corner.
Helix angle 45.
2 flute.
Centre cutting.
Regular cutting edge.
Shank cutting diameter to 0.04-0.0
Weldon shank to DIN 1835B.
编号：DIJ1226510M
●产品描述：
Dijet Milling Inserts
Grade Description: JC5030 (ISO P15 - K20 TiALN PVD Coated)
Giving longer tool life. For high speed cutting carbon steel, alloy steel and die steel.
RDMX Indexable Milling Inserts
编号：DIJ1228860J
●产品描述：
Dijet Inserts
Grade JC5040
(P20-P40/M15-M40 Coated grade. For die-mould applications across the range of steels and some stainless steels).
For all dimensional and technical specifications please refer to our catalogue.
Peripheral Inserts (P15-P35 M15-M40)
For milling in a variety of steels including tool steels, ferritic and martensitic stainless steels.