Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? PCLNR boring bar and 10 Dijet CCMT inserts.

PCLNR Toolholder and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert SetSet contains:
1x PCLNR toolholder
and 10x CNMG inserts grade JC215V.
PCLNR 2525M12 - Right Hand
95 approach for negative 80 rhombic
inserts.
0.02 - 0.6mm/rev.
D.O.C.: 0.5 - 6.5mm.

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? PCLNR boring bar and 10 Dijet CCMT inserts.

PCLNR Toolholder and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert Set contains:
1x PCLNR toolholder
and 10x CNMG inserts.
PCLNR 2020K12 - Right Hand
95 approach for negative 80 rhombic
inserts.
0.02 - 0.6mm/rev.
D.O.C.: 0.5 - 6.5mm.

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

Dijet Milling Inserts

Grade description: JC5030 (ISO P15 - K20 TiALN PVD Coated) Giving longer tool life. For high speed cutting carbon steel, alloy steel and die steel.

For all technical specifications and tool holders please refer to our catalogue.

Milling Inserts

Spare Reverse Clutches

To suit Indexa-Seiki tapping heads.

Dijet Milling Inserts

Grade Description: JC5030 (ISO P15 - K20 TiALN PVD Coated)
Giving longer tool life. For high speed cutting carbon steel, alloy steel and die steel.

SGHN Indexable Milling Inserts

Dijet Milling Inserts

Grade description: JC5015 (P10-P30/M25-M35/K20) PVD coated grade. General purpose milling applications.

For all technical specifications and tool holders please refer to our catalogue.

Milling Inserts

Dijet 3 Flute 45 Helix Slot Drills for Aluminium Plain Shank Carbide

For profiling, slotting and drilling with special geometry for aluminium, copper alloys and other non-ferrous materials. Very sharp edges for smooth action in soft materials minimising chip sticking to the edge. Centre cutting for drilling.

For all dimensional and technical specifications please refer to our catalogue.

3 Flute Long Shank Series

Dijet Mirror Ball Cutters

A range of cutter bodies and inserts for finishing the profiles of dies and moulds. Inserts are precision ground to ensure accurate workpiece form and high quality surface finish, which minimises subsequent polishing. The DZ coating provides for maximum tool life and edge durability when cutting at high speeds. Should be held in a roller lock type chuck.

For all dimensional and technical specifications please refer to our catalogue.

Straight Neck

Dijet Modular Head End Mill Shank Type

The Dijet MSN carbide threaded arbor is for use with Diemaster? MDH modular end mill heads. The Carbide shank combination gives highly efficient machining for deep applications increasing productivity rigidity. Through coolant hole.

For all technical specifications and Diemaster? MDH modular end mill heads please refer to our catalogue.

MSN Carbide Shank Holder - End Mill Shank Type (Through Coolant Hole)

RDHX Inserts

Grade DX25
(P25) Uncoated For steel milling operations, good toughness, wear resistance and resistance to thermal cracking.



To suit Dijet Diemaster End & Face Mills