产品 / 切削工具
编号：DOR0265142N
●产品描述：
A510 4.20mm HSS-TiN ADX S/S JOBBER DRILL
编号：DOR0258133G
●产品描述：
Dormer Heavy Duty Drills HSS-Co 8%
Drills up to 4 x diameter. Point angle: 135. Manufactured to BS 328, DIN 338.
Series A777 - Metric
编号：DOR0251050N
●产品描述：
Dormer Jobber Drills Steam Tempered HSS
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.
Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
Series A100
编号：DOR0251995G
●产品描述：
Dormer HSS Stub Drills
The A120 HSS stub drill from Dormer has a standard helix right hand spiral. The rigidity of these Dormer stub drill bits allow them to be used in portable drills, turret and automatic lathes.
HSS Stub Drill - Series A120 - Imperial
编号：DOR0269053R
●产品描述：
Dormer HSCO Jobber Drills
High productivity one-hit drilling across a wide range of materials.
130° special point geometry ensures consistent hole size and quality throughout the full depth of the hole.
Size Range: A940 (10xD) - 1.0-20.0mm, 3/64-25/32 Inch.
A940 Long Series HSCO Jobber Drills Bright
A940
Excellent for: Carbon/alloy steels, stainless and titanium
Good for: Cast iron, copper, aluminium and thermoplastics
编号：DOR0258184M
●产品描述：
Dormer Heavy Duty Drills HSS-Co 8%
Drills up to 4 x diameter. Point angle: 135. Manufactured to BS 328, DIN 338.
Series A777 - Metric
编号：DOR0265170A
●产品描述：
A510 7.00mm HSS-TiN ADX S/S JOBBER DRILL
编号：DOR0265138J
●产品描述：
A510 3.80mm HSS-TiN ADX S/S JOBBER DRILL
编号：DOR0250430P
●产品描述：
Dormer Stub Drills HSS TiN Tip Coated
Designed for increased productivity and tool life compared to standard stub drills. TiN coating has been applied to 35%-50% of the flute length (dependent on drill diameter) to keep cost down and lower the cost per hole. The 135 split point is advantageous for the pre-drilling of rivets and for drilling in sheet metal. Suitable for drilling alloy steel, carbon steels, cast iron, titanium and aluminium. Manufactured to DIN1897, ANSI.
Series A022 Stub Drill HSS TiN Tip Coated - Metric
编号：DOR0258124Y
●产品描述：
Dormer Heavy Duty Drills HSS-Co 8%
Drills up to 4 x diameter. Point angle: 135. Manufactured to BS 328, DIN 338.
Series A777 - Metric