产品 / 切削工具
编号：IND1443526K
●产品描述：
Indexa-Seiki Flatted Shank Adaptors
Allows existing Weldon Shank Side Lock Arbors to hold smaller shank cutters.
Flatted Shank Adaptor
编号：IND1448630K
●产品描述：
Indexa-Seiki Tapping Chucks - Tension & Compression Type
With axial compensation. Suitable for use on boring machines and machining centres. To ISO/DIN 69871-A Taper Shank.
For all technical specifications please refer to our catalogue.
ISO/DIN 69871-A Taper Shank
编号：IND1072910K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
To suit combination top clamp & pinlock external toolholders
编号：IND1482720K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2 Boring Bar Holders
编号：IND1071940K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
To suit top clamp external toolholders
编号：IND1445630K
●产品描述：
Indexa-Seiki MT-Morse Taper Adaptors
With internal morse taper socket. For use on drilling machines etc. For drills, core drills, reamers etc. Manufactured to stringent quality standards.
To DIN69871/A
编号：IND1067670K
●产品描述：
Indexa-Seiki? Screw-On Boring Bars
93 Approach for 7 positive 55 rhombic inserts.
SDUC R/L
编号：IDX1444180K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.
ER40
编号：IND1075358K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
Within the Index-Seiki? range of indexable tooling spares you will find insert screws, Torx? keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
编号：IND1482740K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2 Boring Bar Holders