Indexa-Seiki? Indexable Boring Bars

Indexa-Seiki??s range of indexable tooling includes, face mills, end mills, boring bars and turning toolholders. All Indexa-Seiki? indexable tooling is manufactured to recognised ISO standards to ensure that the insert is clamped securely in the toolholder or milling body. The exceptional stability of Indexa-Seiki? indexable tooling when in operation, ensures you achieve the precision that you require in the finished component, every time.

Indexable tooling is the modern solution for all machining applications as the carbide inserts held in indexable tool holders can be changed as required to machine different types of material, many inserts have multiple cutting faces, once one face is blunt simply rotate the insert in the toolholder this flexibility helps to eliminate expensive down time and regrinding costs helping you to increase production and drive down running costs.

We are confident that from our selection of indexable toolholders, you will find the tool appropriate to the machining operation you are carrying out.

A full range of spares are readily available for all Indexa-Seiki? Indexable Tooling, please refer to our catalogue for details.

For all technical and dimensional specifications please refer to our catalogue.

SCLCL Boring Bar

95 Approach for 7 positive 80 rhombic inserts

Indexa-Seiki Standard Pull Studs

DIN 69872 (CH Chamfered Shoulder)

Indexa-Seiki Taper Shank Tool Banks

Tool blanks have hardened and ground shanks with a plain front end which is machinable, ideal for the production of special boring bars and adaptors. Other sizes are also available to special order.



BT BT-MAS 403 DN DIN 69871/A IS/QC ISO/DIN 2080

Indexa-Seiki? Screw-On Cartridge Units

90 Approach for 7 positive triangular inserts.

STGC R

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

Axial

C1 Right Hand

Indexa-Seiki Tapping Collets

Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.

For all dimensional and technical specifications please refer to our catalogue.

DIN SZ1

Indexa-Seiki SL - Sidelock Adaptors

For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.

Standard Length

To DIN69871/A

Indexa-Seiki Tapping Collets

Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.

For all technical specifications please refer to our catalogue.

ISO529 SZ1

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 1.0 - 7.0.
(D)11.5mm x (L)18.0mm.

ER11

Indexa-Seiki External Toolholders - Lever Lock

75 Approach for negative 80 rhombic inserts.

PCBN - Left Hand