产品 / 切削工具
编号：SHR1632309K
●产品描述：
Sherwood® Knuckle Form Ripper Cutters
Sherwood® 'Rippal' 3 flute ripper cutters have centre cutting as standard and as they are manufactured from HSS-Co 8% they operate at higher speeds and feeds than conventional shank milling cutters, removing more metal per minute. The Sherwood® 'Rippal' cutter's unique geometry ensures a more efficient cutting action and reduced cutting time helps you to reduce costs and increase productivity. Power and workholding rigidity must be checked carefully before use as it is recommended that 'Rippal' cutters are used with consistent power feed rates to eliminate backlash.
Sherwood® 'Rippal' cutters are available polished or unpolished and with a weldon or combination shank.
930M Series 3 Flute 'Rippal' Ripper Cutters Weldon Shank HSS-Co 8%
编号：SHR0725054F
●产品描述：
Sherwood® Slitting Saw Blades
Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.
Sizes up to 1" diameter do not have key ways.
For all technical and dimensional specifications please refer to our catalogue.
Slitting Saw Small Diameter HSS
编号：SHR0202060K
●产品描述：
Sherwood Multi Flute Rose Pattern Straight Shank Countersinks
Inclusive angle 90.
Overall length: 52mm.
Available in cutting diameters of 3/8", 1/2" and 5/8".
For all dimensional specifications please refer to our catalogue.
90° Degrees
编号：SHR0725027T
●产品描述：
Sherwood® Slitting Saw Blades
Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.
Sizes up to 1" diameter do not have key ways.
For all technical and dimensional specifications please refer to our catalogue.
Slitting Saw Small Diameter HSS
编号：SHR0615842V
●产品描述：
Sherwood 2 Flute Long Series Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright Finish. Flute Type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional specifications please refer to our catalogue.
Metric
编号：SHR0652764Q
●产品描述：
Sherwood Hand Reamers
Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
For all technical and dimensional specifications please refer to our catalogue.
Taper Pin Hand Reamers - Inch
编号：SHR0652147A
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0614410A
●产品描述：
Sherwood HSS Plain Shank Corner Rounding Cutters
Designed to produce convex corner radii. For milling structural, carburising and heat treated steel up to 900N/mm2.
Manufactured to works standards.
5° RH Flutes.
Bright finish, straight helix.
Radii tolerance: ± 0.005”.
Metric
编号：SHR0652810L
●产品描述：
Sherwood Hand Reamers
Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
For all technical and dimensional specifications please refer to our catalogue.
Taper Pin Hand Reamers - Metric
编号：SHR0615648A
●产品描述：
Sherwood 2 Flute Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional and technical specifications please refer to our catalogue.
Short Series S210T - Metric