产品 / 切削工具
编号：SHR0613708F
●产品描述：
HSS-Co. 8% Plain Shank Milling Cutter 4 Flute
Centre cutting, used for profile milling, milling keyways and producing open slots.
Bright finish. Flute type: 30° helix.
Overall dimensions to DIN 844.
Plain shank to DIN 1835A.
Metric Tolerances
Nominal Dia. Limits of Tolerance
Up to 38mm 0.0630 -0.0130
Above 38mm 0.1250 -0.0000
Regular Length
编号：SHR0652254E
●产品描述：
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Inch
编号：SHR0652362N
●产品描述：
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Metric
编号：SHR0652368V
●产品描述：
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Metric
编号：SHR0615111M
●产品描述：
Sherwood Multi Flute End Mills Threaded Shank HSS
Used for profile milling and producing slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Short Series E410T - Metric
编号：SHR0616415F
●产品描述：
Sherwood Corner Rounding Cutters Threaded Shank HSS
Designed to produce convex corner radii. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to works standards. 5 RH flutes. Bright finish, straight helix. Radii tolerance: plus/minus 0.005". Shank to DIN 1835/D.
For all dimensional specifications please refer to our catalogue.
Metric
编号：SHR1617320K
●产品描述：
Sherwood 4 Flute Ball Nosed End Mills Plain Shank Solid Carbide Micrograin
For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting as standard. Manufactured to ANSI Standards.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series 4 Flute Ball Nosed End Mills
编号：SHR0616206G
●产品描述：
HSS Plain Shank Dovetail Cutters (Single Angle Cutters)
Bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
45° Corner Angle - Metric (Form C)
For all dimensional and technical specifications please refer to our catalogue.
编号：SHR0652256G
●产品描述：
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Inch
编号：SHR0615646Z
●产品描述：
Sherwood 2 Flute Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional and technical specifications please refer to our catalogue.
Short Series S210T - Metric