产品 / 切削工具
编号：SHR0615935M
●产品描述：
Sherwood 2 Flute Ball Nose Slot Drills Threaded Shank HSS
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Long Series Type B230T - Metric
编号：SHR0202100K
●产品描述：
Sherwood Single Hole Countersinks HSS (5%)
Manufactured from HSS-E cobalt for deburring and chamfering. Straight shank, ground flute 90 angle.
Manufactured to BS328:Part 5:1983.
For all dimensional specifications please refer to our catalogue.
90° Degrees
编号：SHR0615843W
●产品描述：
Sherwood 2 Flute Long Series Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright Finish. Flute Type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional specifications please refer to our catalogue.
Metric
编号：SHR0613959G
●产品描述：
HSS-Co 8% Cobalt Long Series Milling Cutters 2 Flute
Centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish.
Flute type: 30° Helix. Overall dimensions to DIN 844. Plain shank to DIN 1835A.
Long Series
编号：SHR0615665B
●产品描述：
Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%
Centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
Short Series - Metric
编号：SHR0652128E
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0616022B
●产品描述：
HSS Plain Shank Dovetail Cutters (Single Angle Cutters)
Bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
45° Corner Angle - Metric (Form C)
For all dimensional and technical specifications please refer to our catalogue.
编号：SHR0203223G
●产品描述：
HSS-Co 5% 90° Countersinks
For all ferrous and non-ferrous metals as well
as for hard plastics. General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over.
Made to DIN 335.
编号：SHR0652011B
●产品描述：
High Speed Steel Straight Shank Spiral Flute Parallel Hand Reamer
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Imperial Limits of Tolerance Diameter \t Over\tUp to and Including\t High \t Low -\t0.1181 \t0.0003\t0.00010.1181\t0.2362\t 0.0004\t0.00020.2362\t0.3937 \t0.0005\t0.00020.3937\t0.7087 \t0.0006\t0.00030.7087\t1.1811 \t0.0007\t0.00041.1811\t1.9685 \t0.0008\t0.00041.9685\t3.1496 \t0.0010\t0.0005
编号：SHR0615892A
●产品描述：
Sherwood 2 Flute Ball Nose Slot Drills Threaded Shank HSS
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Long Series Type B230T - Inch