产品 / 切削工具
编号：SHR0652115R
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0726121D
●产品描述：
Sherwood® Slitting Saw Blades
Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.
Sizes up to 1" diameter do not have key ways.
For all technical and dimensional specifications please refer to our catalogue.
Slitting Saw Small Diameter HSS
编号：SHR0203134Q
●产品描述：
HSS-Co 5% 90° Countersinks
For all ferrous and non-ferrous metals as well
as for hard plastics. General purpose chamfering/deburring and countersinking tool. bright finish, 3 flute, ground all over.
Made to DIN 335.
编号：SHR1613060K
●产品描述：
Sherwood® Milling Cutters Plain Shank Carbide Micrograin
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to USCTi Standards. Available in 2 flute for maximum swarf clearance, 4 flute for maximum rigidity and 3 flute offers a combination of the advantages achieved with 2 and 4.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series 3 Flute Slot Drills
编号：SHR0615484M
●产品描述：
Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS-Co
Used for profile milling and producing open slots. Bright finish. Flute Type : 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional and technical specifications please refer to our catalogue.
Long Series Type E431T - Metric
编号：SHR0616017W
●产品描述：
HSS Plain Shank Dovetail Cutters (Single Angle Cutters)
Bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
Regular Series Type 5321T - Inch
For all dimensional and technical specifications please refer to our catalogue.
编号：SHR0615435M
●产品描述：
Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS
Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
Long Series E430T - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0213640K
●产品描述：
Sherwood Solid Counterbore HSS-E
Used for milling of pre-drilled holes to allow bolt or cap head screws to lie flush with the component surface. Spiral, 3 flute. Medium duty. Manufactured to BS328:5:1983.
For all dimensional specifications please refer to our catalogue.
Spiral 3 Flute Plain Shank
编号：SHR0615439R
●产品描述：
Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS
Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
Long Series E430T - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0213520K
●产品描述：
Sherwood Solid Counterbore HSS-E
Used for milling of pre-drilled holes to allow bolt or cap head screws to lie flush with the component surface. Spiral, 3 flute. Medium duty. Manufactured to BS328:5:1983.
For all dimensional specifications please refer to our catalogue.
Spiral 3 Flute Plain Shank