Camozzi Equal Tees

7540
Super-rapid compact fitting Technopolymer equal tube Tee.
Available in 4, 6, 8, and 10mm tubes.

Camozzi Male Stud Couplings

S6510
Super-rapid fittings for plastic tubes. Push-in fitting-male stud.
Available in:
10mm tube - G1/4 thread.
10mm tube - G3/8 thread.
10mm tube - G1/2 thread.
12mm tube - G1/4 thread.
12mm tube - G3/8 thread.
12mm tube - G1/2 thread.

PCL Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Double Ended Tailpieces

For joining two lengths of hose or repairing a hose.

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Pipe Clips - Black

For securing pipe to walls.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Tube suitability: Nylon, polyurethane.

Ball Valves - Female to Male

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Tube suitability: Nylon, polyurethane.

Slide Valve (Exhausting) Female to Female

Pressure Range: 0 to 10 bar. Temperature Range: -18°C to +70°C.

PCL Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Double Ended Tailpieces

For joining two lengths of hose or repairing a hose.

SMC Pneumatic Fittings

Finger valve series VHK has a large effective area of 2.0 to 17.5mm. This series begins with a minimum tube O.D of 4. The valve direction clearly indicates whether the valve is open or closed (shut to open is counter- clockwise). Classification of knob by color difference facilitates distinction between 2 port valves (gray) and 3 port valves (blue).

VHK Series Finger Valve

Quick Fit Pneumatic Fittings

Suitable for vacuum application. Rapid type push on fittings with retaining nut.

Threaded Adaptors

2030 Series

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector