PCL® Safeflow Safety Coupling

Safe and simple to use. Enhances workshop safety - prevents hose whip. Creates a safe compressed air environment. Two stage self-venting release. Genuine PCL product, designed and manufactured in Sheffield, England. Hard wearing steel construction with corrosive resistant finish.
Conforms to ISO 4414:1998 and EN 983:1996. Genuine PCL product, designed and manufactured in Sheffield, England.
Compatible with standard adaptors.

Male Threaded

1/4" BSPT.

Camozzi Male Branch Tees - Taper

2060
Series 2000 pipe fittings BSPT adaptor male/female branch Tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

Blocking Valve

Type: Uni-directional
Size: 1/8

High Pressure Float Valve

Manufactured to BS1212, for use in water tanks and cisterns to prevent overflow.

PCL "100 Series" Airline Coupling Adaptors

Case hardened with hard wearing passivate finish. For use with '100 Series' type couplings.

Female Threaded

Push-fit Solution for Plumbing & Heating Systems

For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standard Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM? and PKM? fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.
Working temperatures and pressures: Central Heating: 3.0 bar at 92C. Hot Water: 6.0 bar at 65C. Cold Water: 12.0 bar at 20C.

?Superseal? Pipe Inserts

The Superseal Pipe Insert has been developed to be used with Speedfit Barrier Pipe and Speedfit fittings to provide an extra line of defence when installing a Speedfit Push Fit System. The insert has its own ?O?Ring which, together with a Stem sliding within the pipe ID, gives a secondary seal against the inside of the fitting. The Speedfit connection, when made with the Insert, has a number of design features. Sliding the stem of the insert into the pipe gives greater compression of the main ?O?Ring on the pipe and greater rigidity of the length of pipe within the fitting, reducing the chance of leaks if a side load is applied. A connection is easier to make because the head of the insert has been designed for ease of insertion.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Elbow Connector to Male Parallel

Series S6520

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Male Stud Swivel Elbow

Series 2520

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Male - Female Reducers

PCL Tailpieces & Threaded Connectors

A comprehensive range designed for use in conjunction with airline couplings in garage and industrial applications. Case hardened with zinc finish.

Male Threaded Unions

For connecting female threaded fittings of the same size.