Sherlock® Sealants

Sherlock® gas seal compound is a non-setting compound for use on metallic threaded and face joints carrying gas including aluminium, copper, steel and zinc. Suitable applications: propane, butane, LPG and natural gas.

Ideal for boats, camping, motor-homes, caravans, BBQ's and most domestic appliances.
Full bond strength is achieved immediately dependent upon humidity levels.

Size: 400g.

Gas Seal Compound

577 - Thread Sealant

Medium strength. Suitable for copper, mild steel, cast iron, stainless steel and galvanised pipe. Carries the German DVGW approval. tested in accordance with EN751-1. Certified to NSF P1. Conforms with: BS 6956 : 7 (gas).
AGA Approval No. 3207 to 1050kPa (152psi).

Activators for Thread & Gasket Sealants

7649N - Recommended for use when a very fast cure is required. 7471T - Recommended for use at below 15C or on inactive surfaces.

PTFE Tape

General purpose tape for sealing gas/water pipe threads. Chemical and acid resistant. For use at temperatures from -270C to 260C.

Water Type

12mtr x 12mm roll. For hot and cold water pipes. Made to BS7786:1995.

Stag Jointing Compound

Easy break, smooth consistency, lead-free jointing compounds. Type 'A' Thin consistency, for small joints which are new or undamaged. Type 'B' Thick consistency, for use on uneven surfaces.

Stag White Pipe Jointing Compound

Linseed oil based, lead free jointing compound. Its smooth consistency allows easy dismantling of joints when required it also acts as a temporary lubricant during assembly of threaded pipework. Suitable for use on flanged or screw threaded joints. Used extensively in the plumbing and gas fitting industries. Conforms to BS 6956: Part 5: 1992

572 - Thread Sealant - Coarse Threads - Slow Cure

Recommended for all coarse threads where slow cure is required to allow final adjustment before sealing. Meets BS 6956 Type A for sealing gas fittings. WRC approved for use with potable water.

5400 Medium Strength Thread Sealant

LOCTITE® 5400™ is designed for the locking and sealing of
metal threaded pipes and fittings. The product cures when
confined in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from shock and
vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate.



Technical Data:
• Maximum thread size: M80, R3"
• Strength: Medium
• Viscosity: 5,000 - 20,000 mPa∙s
• Breakaway torque: 19Nm
• Service temperature range: -55°C - +150°C
• Pack size: 50ml

Benefits:
• Leading in health and safety.
• No hazard symbols, no risk phrases & no safety phrases.
• “White” Material Safety Data Sheet – no entries in
sections
2, 3, 15 and 16 of MSDS acc. to (EC) No. 1907/2006 – ISO
11014-1.
• Excellent chemical and thermal resistance of cured product.
• Thixotropic nature: less migration of liquid product after
application to the substrate.

Hylomar Universal Blue Gasket & Sealing Compound

Leading non-setting gasket and sealing compound in use world-wide. Used some of the world's major automotive manufacturers and several Formula 1 teams. Non-hardening and non-setting allows for unlimited assembly time. Vibration resistant. Allows metal to metal contact. Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants. Seals surface imperfections. Withstands rapid variations in temperature. Flame, dust and moisture proofing properties.

Available in 40g, 100g and 350g.

Stag Jointing Compound

Easy break, smooth consistency, lead-free jointing compounds. Type 'A' Thin consistency, for small joints which are new or undamaged. Type 'B' Thick consistency, for use on uneven surfaces.