Stag Jointing Compound

Easy break, smooth consistency, lead-free jointing compounds. Type 'A' Thin consistency, for small joints which are new or undamaged. Type 'B' Thick consistency, for use on uneven surfaces.

Hylotyte Red - semi hardening gasket

Hylotyte Red - semi hardening gasket compound offers the user a high sealing performance with the advantage that the product is non-flammable and will not oxidise within the joint even after prolonged service. This ensures exceptional sealing performance even after many years.

542 Hydraulic Sealant

Medium strength, medium viscosity. Impervious to all common hydraulic fluids including fire resistant synthetics. Will not clog valves or fine filters. Replaces tapes, pastes and self-sealing compression joints.
Recommended for threaded fittings as used in hydraulic and pneumatic installations.
Medium threadlocking strength.
Suitable for high pressure systems.
Temperature range: -55C to 150C

Hylomar Universal Blue Gasket & Sealing Compound

Leading non-setting gasket and sealing compound in use world-wide. Used some of the world's major automotive manufacturers and several Formula 1 teams. Non-hardening and non-setting allows for unlimited assembly time. Vibration resistant. Allows metal to metal contact. Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants. Seals surface imperfections. Withstands rapid variations in temperature. Flame, dust and moisture proofing properties.

Available in 40g, 100g and 350g.

572 - Thread Sealant - Coarse Threads - Slow Cure

Recommended for all coarse threads where slow cure is required to allow final adjustment before sealing. Meets BS 6956 Type A for sealing gas fittings. WRC approved for use with potable water.

Activators for Thread & Gasket Sealants

7649N - Recommended for use when a very fast cure is required. 7471T - Recommended for use at below 15C or on inactive surfaces.

PTFE Tape

General purpose tape for sealing gas/water pipe threads. Chemical and acid resistant. For use at temperatures from -270C to 260C.

Water Type

12mtr x 12mm roll. For hot and cold water pipes. Made to BS7786:1995.

Wellseal Jointing Compound

Gives the best possible sealing performance in the most varied of conditions. Threaded connections, flat faced joints, with or without a gasket depending on assembly design. Resistant to commonly used fuels, lubricants and coolants, is non-corrosive and free from abrasive fillers.

High Performance Silicone Gasket - 5900

Typical applications include stamped sheet metal covers (timing covers and oil sumps) where good oil resistance and the ability to withstand high joint-movement is required. It withstands on line, low pressure tests carried out before product begins to cure. The thixotropic nature of LOCTITE 5900 reduces the migration of liquid product after application to the substrate. LOCTITE 5900 has an excellent adhesion profile to an outstanding wide variety of plastic substrates, as well as glass, ceramics and metals. NSF International Registered to NSF Category P1 for use as a sealant where there is no possibility of food contact in and around food processing areas.

Loctite 55 Pipe Sealing Cord (150M)

Versatile pipe sealant. Enables the improvements required of today?s pipe systems, instantly seals (irrespective of ambient temperature) domestic and industrial pipe systems during their assembly. Can be safely and confidently used with drinking or waste water (hot and cold), gas, compressed air and industrial oils. Potable water: WRC listed for use with potable water up to 85C, meets BS 6920. Gas and water: complies with class ARp, DVGW approval. Conforms to DIN 30660.