Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Fixture Components

Material: Medium Carbon Steel. Surface Finish: Manganese Phosphate.

FC40 - T-Slot Bolt

Vices

Recessed, replaceable jaws. Quick-acting cam gives instant settings by moving sliding steel bar attached to inside jaw. With cut-out base for clear through drilling. Hardened and ground lever arm locking mechanism. Heavy base can be clamped down to a milling machine or drill press. Adjustable clamping pressure.

Matlock™ Industrial Racking and Shelving

Matlock™ QuickRack industrial racking and shelving is a flexible, simple and cost effective solution to your storage problems. Assembly of the shelving couldn't be simpler, simply slot and tap the frame work together as there are no fiddly nuts and bolts. Each shelving bay is supplied with 18mm thick shelves, extra shelves are available on request, allowing you to design shelving bays to suit your specific space/storage requirements. THIS IS A SHELF UNIT ONLY

QuickRack Additional Heavy Duty Shelf Kit 1800x600mm (WxD)

The additional shelf kit from Matlock Quickrack contains everything you need to add a single shelf to an existing bay of Matlock Quickrack racking.

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: hrc38. Surface Finish: Manganese Phosphate. Jaws: Surface treated with high frequency quenching.

CC12 - Adjustable Clamp

Kennedy Workshop Vices

Manufactured from the highest quality castings with precision cut screw mechanisms and precision machined jaws.
Suitable for workshop, automotive and engineering use.

KECV100 Engineers Vice

KECV100 Engineers Vice capacity:
Jaw Opening: 140mm (5 5/8”)
Recommended jaw Opening: 100mm (4”)
Jaw Width: 100mm (4”)
Jaw Height: 60mm (2 3/8”)
Weight: 9.5kg

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3204 Cast Iron 3 Jaw Plain Back Chuck

Rear mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Indexa Type SOPP Horizontal and Vertical Rotary Table

With a disengageable worm gear which allows rapid indexing. One rotation of handle equals four degrees on collar. The table is made of high grade cast iron. Works as an indexing unit in the vertical position as well as a conventional rotary table for circular cutting, boring or angle setting, etc. Optional dividing plates are available separately.



Accuracy:
Parallelism of clamping surface to base: 0.020mm.
Flatness of clamping surface: 0.015mm.
True running cylindrical centre bore: 0.020mm.
True running of tapered centre bore: 0.020mm.
Squareness of clamping surface to centre slot: 0.010mm.

Precision Ground Flat Stock (36")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Matlock Industrial Cupboards and Lockers

Combining robust design with a heavy gauge "double skin" door to guard against leverage and impact, these lockers are hard to beat when it comes to long-lasting security. Supplied with key operated deadlock and 2 keys as standard.

Picture illustrates door combination only, for door colour refer to description.

Heavy Duty Steel Lockers