Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Workstand

Space saving work units available as mobile or static. Base shelf can be inverted to create an anti-roll off upstand. The 30mm worktop is available in multiplex or wisa.
Dimensions: 600 x 600 x 780mm high

Precision Brand Stainless Steel Shims

Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.

Tensile strength: 185,000psi min.

Stainless Steel Shims - Inch Sizes

Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.

Kennedy® Slot/Tenon Soft Jaws

To suit quick jaw change chucks (Berg, Forkardt, Gamet, Kitagawa, Reishauer, Rohm, Schunk and
SMW-Autoblock).

3 Jaw Sets

Engineers' Fully Welded Static Workbenches

Fully welded static benches available - delivered ready to use. Choice of regular 2mm steel plate worktop or 20mm Beech layered worktop. Long life epoxy powder coat. Heavy duty steel framework with base shelf. All units are 600mm deep and 910mm high.

1500mm Wide Workbenches

Static Bench with lockable drawer. Multiplex Beech Worktop Finish.

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 800 x 650mm (W xD)

8 Compartment

Extra Shelf for Roller Shutter Door Cupboard

1000 x 550mm

Atlas? Precision Toolmakers Vices

Manufactured from high carbon steel, precision ground on all faces. Phosphor bronze bush, 90 vee on clamping jaws.

Standard Precision Toolmakers Vices

Jaw hardness HRC 58-62. Squareness and parallelism to within 0.005mm.