Quick Set Machine Shields

14” (3/4” bore) hose length. Suitable for small machine tools. Protect from fluid splash and flying swarf.
Fully adjustable with magnetic base. Not for use as a heavy duty enclosure guard on heavy duty milling machines.

CNC Tool Inserts

For use in conjunction with empty tool carrier blocks.

Mill Guards

Steel tubular frame and 5mm thick polycarbonate visors for heavy duty applications. Complies with BS EN 292 : 1993 and BS 5304 : 1988.

Enclosure

Quick release plunger pin allows each section to swing aside for instant access. Can be installed on any make of milling machine. Supplied with T-slot and bolts. Model EM/1 has 1 hinged side and front panel, right hand opening as standard (if left hand is required please state when ordering). Models EM/2 and EM/3 have two equal size panels.

Rubber Flex Tap Chuck Collets

Designed for use with the Jacobs Tap Chucks and are unique in providing at least twice the gripping power of a conventional split steel collet. Features include: Parallel jaw inserts exert uniform and accurate gripping over the collet length. Durable one-piece construction resists heat, coolants and cutting compounds. Steel jaw inserts precision ground and hardened to ensure maximum gripping accuracy and wear resistance. *J116 and J117 may be used as replacements for J112, J113, J114.

Bench Shears

Hand operated, compound lever action bench shears. Capable of rapidly cutting through metal plate, strip and bar. Solid steel frame for rigidity and strength. With hardened and precision ground blades for accurate cutting. Adjustable blade guard.



Dimensions (WxHxD): 370x370x150mm.
Weight: 19Kg.

Toggle Clamp Spares

As Neoprene capped but suitable for clamping onto irregular shapes or angled workpieces.

Swivel Foot Spindles

Kennedy® Supra-Rapid Clamping Industrial Keyless Drill Chucks

Fully hardened and ground working parts. The jaws are centre ground for alignment concentricity. Robustly designed for durability and wear resistance in the most arduous of industrial applications on stationary drilling machines. Unsuitable for reversing drills.

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Vertical Industrial Toggle Clamps

Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

'U' Bar (Adjustable) Type

Flanged Base

High Speed Steel Knurls

Precision hobbed to produce burr-free clean cut knurls.

Straight