Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.

FC07 - Engineers Stud

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: HRC32-38. Surface Finish: Manganese Phosphate

CC03 - Swan Necked Clamp

Precision Brand Stainless Steel Shims

Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.

Tensile strength: 185,000psi min.

Stainless Steel Shims - Metric Sizes

Vertical Industrial Clamps

Features: Comfortable, cushioned PVC orange handle grips. Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use, the rivets of the larger clamps rotating in hardened bushes or directly in the close-toleranced holes of hardened parts.

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Matlock™ Parts, Component and Tool Storage Bins

These high strength polypropylene Euro boxes have reinforced corners and rims with integral interlocking hinged lids; that can not become separated from the container and inhibits theft when fitted with tamper-evident seals, they improve access and safety when transporting heavy loads.

The smooth flat base allows silent movement on conveyors making Matlock® Euro boxes suitable for use in distribution centres or warehouse storage and when they are not in use, the bins can be nested so that they take up 70% less space, ideal when being returned on transport.

All Matlock® Euro containers feature Ergonomic hand grips for safer manual handling and can be sealed using security tags.

Available in 20Ltr, 40Ltr or 54Ltr capacities in a choice of two colours Blue or Grey.

Euro Storage Bin

20Ltr
External size: 400 x 300 x 260mm
Internal size: 350 x 270 x 240mm
Weight: 1.75kgs

40Ltr
External size: 600 x 400 x 250mm
Internal size: 565 x 370 x 230mm
Weight 3.0kgs

54Ltr
External size: 600 x 400 x 335mm
Internal size: 550 x 365 x 315mm
Weight: 2.80kgs

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

CNC Tool Inserts

For use in conjunction with empty tool carrier blocks.