Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Modular Coolant Hose System



Valves

Thread fittings fully compatible with BSPT. In-line check valves stop fluid drip when flow stops, keeping hose full and reducing initial dry cutting.

For drawers 800 x 750mm (W x D)

13 Compartment

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Horizontal Industrial Toggle Clamps

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.

'U' Bar (Adjustable) Type

Tipped Spindle

Tool Carriers

Tool carrier blocks offer a new, flexible method of storing CNC tooling. Individual tool pots simply clip into the carrier block. Specify the type of tooling and then add the required amount of storage pots to the carrier block. Tool carrier blocks may be used in conjunction with trolleys, cupboards or freestanding on a bench top. Supplied in yellow RAL1023 only.
Tool carrier block dimensions (W x D x H): 590 x 124 x 110mm.
Tool blocks can mount directly into 750mm wide drawers.

590W Carrier 6 ISO 35 (BOT-406-2503D) illustrated.

CNC Tool Storage

Steel bodies with resilient plastic inserts to store and protect spindle nose tooling. Free-standing or for use in conjunction with trolleys and racks.

Tool Blocks

Tool Block Capacity: 4 pot

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



Ideally suited to thin or small workpieces, this usually means thicknesses less than 3mm.
Fine Pole.
Pole spacing: 1.5mm steel / 0.5mm brass.
Force: 80N/cm2.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Extended Hook (Pack of 5)

Modular Coolant Hose System



Junction Pieces

Y-Redycer, Adaptor