Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3204 Cast Iron 3 Jaw Plain Back Chuck

Rear mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Heavy Duty Drawer Cabinets

Create a clean, safe and well-organised storage space with heavy duty drawer cabinets. High capacity units in 5 different plan sizes. All cabinets are fully lockable and finished in epoxy powder coat RAL7035 grey with RAL5010 blue fronts. 75kg U.D.L. capacity per drawer with 100% extension slides.
Drawer dividers are available - steel slotted or plastic box kits.

Size: 1050 x 750 x 1600mm (W x D x H)

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Matlock™ Plastic Storage Bin Size: No.3A Dimensions 350x280x184mm(LxWxH)

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Circular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build. Supplied with: Brass and steel top plates. Removable hexagon key handles ensure ease of operation through a 180 arc. All chucks are supplied with clamps, side and end stops.



Fine pole. Pole spacing: 1.5mm steel / 0.5mm brass. Force: 80N/cm2

Matlock Industrial Cupboards and Lockers

Combining robust design with a heavy gauge "double skin" door to guard against leverage and impact, these lockers are hard to beat when it comes to long-lasting security. Supplied with key operated deadlock and 2 keys as standard.

Picture illustrates door combination only, for door colour refer to description.

Heavy Duty Steel Lockers

T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non alloy carbon steel. Heat treated to HRC 28-32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.



Contents: Engineers Studs (4 off each): 75, 100, 125, 150, 175 & 200mm long. Step Blocks (4 off each): 28, 35 & 98mm high. Step Clamps (2 off each): 64, 100 & 150mm long. Nuts Extension 4 off Flanged 6 off T- slot 6 off.