Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Storage Bin Locking Clip

The Matlock™ anti bump locking clip is manufactured from zinc plated spring steel; it is designed for use with Matlock™ louvred panels and plastic storage bins. It effectively locks the bin into place on the panel to avoid being accidental 'knocked-off'. Also ideal for use on panels fitted to vans to avoid bins coming dislodged due to the effects of cornering and uneven road surfaces.

Toggle Clamp Spares

For use in conjunction with all spindles on clamps with adjustable 'U' bars.

Flanged Washers

Framework Benches

Simple and economic solutions to the need of production assembly, maintenance and despatch personnel.
18mm FSC compliant chipboard working surface (210kg UDL). Shelves on workstations carry 150kg UDL.
Robust uprights and light grey beam finish. Kits supplied with metal feet and full assembly instructions.

Kennedy Steel Shims

Designed to achieve accurate alignment. High quality steel to prevent corrosion from exposure to acids or alkalis. With rounded corners, perfectly deburred for maximum safety. Permanent markings indicate thickness and dimensions. Extraction and insertion tabs facilitate positioning and removal of the shims.
EN2. CS4 fully hardened bright mild steel. 6” wide. 1lb tins.

Steel Shims - Inch Sizes

Key Steel Stainless Steel

Industrial Stainless Steel - Metric Key SteelStainless Steel - Metric

Modular Coolant Hose System

Can be used with coolants, fluids and air lines. Suitable for all wet machining, spark erosion and air line operations up to 50PSI air and 30PSI liquid. Flow direction is easily and accurately positioned with no spring-back. All parts are fully interchangeable and fully replaceable. Manufactured from Acetal - non-conductive and chemical resistant. Available with 1/4”, 1/2” and 3/4” bore. Hose is blue, all other fittings are orange. Threaded fittings are fully compatible with BSPT.

Starter Packs

1/2” Bore

Matlock Flammable Storage Cabinets

Welded construction from 0.9mm steel. Designed to maintain integrity for 30 minute fire rating. 75kg (UDL) adjustable shelves (spillage trays). Welded lift out base spillage sump. Strengthened rebated doors. Secured by chrome 2-way locking handle (2 keys). Powder coated grey. Supplied with flammable labels. Compliant with DSEAR 2002. HS(G)51, 1990. Factory Inspectorate Certificate of Approval No.1: Parts 3 & 4. CoSHH. Help achieve ISO14001.
Colour: yellow.

Shelf Capacity 75kg Uniformly Distributed Load.

Flammable Storage Cabinet

Dimensions (H x W x D): 1830 x 915 x 459mm.
Number of shelves: 3.
Number of doors: 2.

Self-Centring Geared Scroll Lathe Chucks

Produced to a well proven design for universal application. Scrolls are forged, balanced and hardened. Thread flanks are ground on both sides. All models have grease nipples for easy lubrication and are supplied with two sets of solid jaws - internal and external stepped.

Type 3204 Cast Iron 3 Jaw Plain Back Chuck

Rear mounting. DIN 6350 (form A). 3 Jaw. Plain back with adaptor recess.

Fixture Components

Material: Body - Medium Carbon Steel EN198. Ball - Through Hardened Steel EN 31. Hardness: Body - HRC 32 - 38. Ball - HRC 62. Surface Finish: Ball - Hardened and Ground

FC17 - Clamp Set Screw

Dog Point