Trays

Vacuum formed trays. Supplied with one or three compartment sections to make your desired layout. Trays are 55mm high for 75mm drawers or 80mm high for 125/175mm drawers.
3 trays are required for the 500mm wide cabinets, 5 for 750mm and 7 for 1000mm

Bott Inlay Trays

Indexa Machine Vices

Indexa modular precision vices are designed for use on standard machines or CNC machine centres when precision grinding and milling. Indexa modular vices can be set up individually or work in multiples on machine tables depending on the dimensions of the material to be machined. Manufactured from high-grade alloy steel, that is hardened to ensure the vice can withstand the pressures and forces whilst in use. Supplied with the range of accessories.

Modular Precision Machine Vices

Tolerances:
Parallelism: 0.005mm.
Perpendicular accuracy: 0.005mm.
Parallelism: 0.005mm.
Perpendicular accuracy: 0.005mm.
Accessories: L-wrench, T-wrench, vice holding clamp, work stop with main bolt, positioning key-nuts.

For all dimensional specifications please refer to our catalogue.

Colour-Coded Plastic Shim Stock

Manufactured from a high quality plastic material. Used for gaskets, special parts and various manufacturing applications it is easy to cut, resists oil and has minimal compression during use. The thickness tolerances are to industry standards. Non-conductive to electricity. The thickness is indicated by shim colour which eliminates the need for a micrometer.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Perfo Wall Panel Clips

Each set is supplied with the illustrated Perfo accessories (excluding tools). Additional components from the Perfo range can be added to sets as required. Louvre panels.

Precision Ground Flat Stock (1000mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Free Standing Racks

Available in two heights and two widths. Made from 16swg channel section which supports Louvre Panels either single or double sided.
Colour: Dark grey/light grey

Kennedy® Industrial Drill Chuck Arbors

Precision machined, fully hardened & ground to give maximum surface contact.

KD Type - Morse Taper Shank to Din Taper Arbors

Fully hardened and ground Morse Taper to DIN 228.
Chuck taper to DIN 238.

Modular Coolant Hose System

Threaded fitting 1/4 turn

Metal Ball Valves

Threaded fitting 1/4 turn.

Lathe Chuck Jaws

For self-centring lathe chucks (IND-475) - Indexa 3200 and 3500. Chuck jaws supplied in sets of 3.

Hard Jaws

Outside