产品 / 工装夹具
品牌
分类
垫片
机床附件
可移动组合木工工作台
仓库用货架设施
齿型固定夹
工业级钥匙钢
工业级钻套
滚花刀
过磁器
机床防溅视窗
机床用冷却液管路系统
剪板机
可移动组合木工工作台
快换式刀座
快速异型夹
模具弹簧
平面平整块
三爪卡盘
砂轮修整器/笔
生产用工具标准放置器具
生产用物流设施& 规范放置器具
台虎钳&平口钳
特种物品专业放置柜
旋转卡盘
压板
银器钢
专业刀具放置
专业钢制工作台
专业生产用工具箱
钻夹头
V90SA 'U' BAR ADJUSTABLEVERTICAL CLAMP

V90SA 'U' BAR ADJUSTABLEVERTICAL CLAMP

编号:IND4431270K
●产品描述:
Vertical Industrial Toggle Clamps

Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

'U' Bar (Adjustable) Type

Straight Base
SILVER/GREEN 2-DOOR LOCKER 1780x305x305mm

SILVER/GREEN 2-DOOR LOCKER 1780x305x305mm

编号:LSE8110020G
●产品描述:
Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.



3mmx200mmx500mm GROUND FLAT STOCK

3mmx200mmx500mm GROUND FLAT STOCK

编号:CTL4133413P
●产品描述:
Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.
3mmx20mmx500mm GROUND FLAT STOCK

3mmx20mmx500mm GROUND FLAT STOCK

编号:CTL4133402C
●产品描述:
Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.
SILVER/SILVER IND. STD. CUPBOARD 1780x915x460mm

SILVER/SILVER IND. STD. CUPBOARD 1780x915x460mm

编号:MTL4056410S
●产品描述:
Matlock Industrial Cupboards and Lockers

Matlock industrial steel storage cupboards provide strong secure storage. All cupboard components are manufactured from mild steel with an attractive paint finish. The loading capacity for each shelf is a maximum of 85kg UDL*.


*Uniformly Distributed Load.

Standard Industrial Steel Cupboard

The standard Matlock steel cupboard is supplied with three adjustable shelves, extra shelves available on request.

Dimensions (H x W x D): 1780 x 915 x 460mm.

Additional shelf is available on Order Code: MTL-405-6440H.

Door colours not illustrated in picture, please refer to product title.

Cupboard housing is painted silver.
Available with the following door colours: blue, green, red, silver, white or yellow*.


Please refer to the PDF of the catalogue for Order Codes.


*Other colours available on request.
16912304.11V 1130x1000x550mm COMPUTER STATION

16912304.11V 1130x1000x550mm COMPUTER STATION

编号:BOT4053060V
●产品描述:
Workshop Computer Workstations

650/1000mm wide x 550mm deep lockable cupboards with cable routing apertures. Lockable slide out keyboard tray, slide out shelf - ideal for printers (650mm wide model only). Static shelf, adjustable on 25mm pitch with 50kg UDL. Lockable ventilated monitor housings, sloping writing surface (1000mm wide models only).

Open Top Workstation

1/4

1/4"x5/8"x18" GROUND FLAT STOCK

编号:CTL4130703D
●产品描述:
Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".
EK16 SCROLL SOFT JAWS 160mm (SET-3)

EK16 SCROLL SOFT JAWS 160mm (SET-3)

编号:KEN4906030K
●产品描述:
Kennedy® Scroll Soft Jaws to suit Manual Chucks

To suit Pratt Barnard metric scroll chucks (Standard Accuracy and Super Precision).

3 Jaw Sets

P100 PUSH-PULL TOGGLE CLAMP

P100 PUSH-PULL TOGGLE CLAMP

编号:BRA4101200M
●产品描述:
Push-Pull Clamps

Features: Comfortable, cushioned PVC orange handle grips. With flanged base and fixed position spindle.Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use.



2.5mm DIA. x 13

2.5mm DIA. x 13" SILVER STEEL

编号:CTL4325303D
●产品描述:
Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.