Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Mobile Trolleys/Racks

Similar to a free standing rack by mobile. Fitted with four 5" castors to the base which supports double sided Louvre Panels. Available in one height and two widths.
Colour: Dark grey/light grey

Tool Carriers

Tool carrier blocks offer a new, flexible method of storing CNC tooling. Individual tool pots simply clip into the carrier block. Specify the type of tooling and then add the required amount of storage pots to the carrier block. Tool carrier blocks may be used in conjunction with trolleys, cupboards or freestanding on a bench top. Supplied in yellow RAL1023 only.
Tool carrier block dimensions (W x D x H): 590 x 124 x 110mm.
Tool blocks can mount directly into 750mm wide drawers.

590W Carrier 6 ISO 35 (BOT-406-2503D) illustrated.

Heavy Duty Vertical Industrial Clamps

The heavy duty vertical series are designed to be adaptable and durable, and to withstand abuse in heavy duty applications.Specification: The main components are of steel, the forked lower handles being precision alloy steel castings, and all axles of hardened steel running in either hardened bushes or directly in the close-toleranced holes of hardened steel. The clamps are finished chemi-black.

Fixture Components

Material: Body - Medium Carbon Steel EN198. Ball - Through Hardened Steel EN 31. Hardness: Body - HRC 32 - 38. Ball - HRC 62. Surface Finish: Ball - Hardened and Ground

FC17 - Clamp Set Screw

Serrated Point

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Square - Inch