Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Horizontal Industrial Toggle Clamps

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.

'U' Bar (Adjustable) Type

Tipped Spindle

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Modular Coolant Hose System

Male threads

Threaded Spigots

Tool Carriers

Tool carrier blocks offer a new, flexible method of storing CNC tooling. Individual tool pots simply clip into the carrier block. Specify the type of tooling and then add the required amount of storage pots to the carrier block. Tool carrier blocks may be used in conjunction with trolleys, cupboards or freestanding on a bench top. Supplied in yellow RAL1023 only.
Tool carrier block dimensions (W x D x H): 590 x 124 x 110mm.
Tool blocks can mount directly into 750mm wide drawers.

590W Carrier 6 ISO 35 (BOT-406-2503D) illustrated.

Heavy Duty Weldable Toggle Clamps

Hold down action suitable for high production automotive type applications. Heavy duty forged components with hardened and ground pivot points. The users provide their own handle and bar and weld them to the clamp which is then welded to a base. These flexible mounting clamps allows them to be used in situations where standard clamps are not effective.

Bott Verso?Storage Benches

30mm thick multiplex worktops. Lockable cupboards. All benches are supplied fully assembled ready for immediate use.
All models are 600mm deep and height adjustable from 780 - 930mm.
Drawer dividers available - supplied separately.

Width 2000mm

2x 500mm 3 drawer,
1x 750mm 3 drawer

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Drawer Cabinets

Robust freestanding storage cabinets available in 2 widths. Can also be used as slide under pedestals for workbenches.
? Tough welded steel construction
? Finished in epoxy powder coat gre/blue
? 60kg load capacity per drawer
? All units are 500mm deep x 800mm high
? Fully lockable

500mm wide Drawer Cabinet

1x 125mm and 4x 175mm drawers

Independent Jaw Lathe Chucks

Independently adjustable jaws. This allows firm gripping of irregular shaped work and the 4 jaws allow a square component to be perfectly centred to the chuck while achieving maximum gripping force. The chuck bodies are made of steel (sizes 85 - 160mm) or high quality cast iron (sizes 200-800mm). The jaws are made of high quality carbon steel and hardened. Thrust bearings and operating screws are made of case hardened steel. Supplied with reversible solid jaws, internal and external stepped. With T-Slots.

Cast Iron 4 Jaw Plain Back Chuck Type 4304

Plain back with adaptor recess. Front mounted. DIN 6351.