Positive Drive Slot

Equipped with a positive drive slot

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.

FC07 - Engineers Stud

High Speed Steel Knurls

Precision hobbed to produce burr-free clean cut knurls.

Right Hand

Matlock Industrial Cupboards and Lockers

Matlock low wallet lockers offer convenient safe storage of small items like keys, wallets and cameras.

Unit size: 1000x305x105mm (HxWxD).
Compartment size: 90x192x150mm (HxWxD).

Unit size: 1000x305x105mm (HxWxD).
Compartment size: 90x192x150mm (HxWxD).

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Kennedy® Magnetic Tooling

Kennedy® magnetic chuck blocks are for use with magnetic chucks that have parallel poles, so that the magnetic field can be extended to hold awkwardly shaped work pieces. Supplied in matched pairs. Machinable.

Magnetic Chuck Blocks

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Kennedy® Soft Scroll Jaws to Suit Pratt Burnard Chucks

For Standard, Super Precision, Griptru, All Steel (type 78), Pratt Burnard old type and Hardinge chucks.

3 Jaw Sets