Pin Type Chuck

Equipped with a pin type positive drive and designed for medium or heavy duty portable, bench or floor mounted power tools. Industrial quality with fully hardened and ground working components which offers high accuracy, gripping power and durability. Each chuck has centre ground jaws for absolute straightness and alignment, through hardened sleeve teeth plus hardened nose and keyholes to provide wear resistance. The one piece sleeve eliminates crack between the driving teeth.

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Fixture Components

Material: Medium Carbon Steel. Surface Finish: Manganese Phosphate.

FC40 - T-Slot Bolt

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 32-38. Surface Finish: Manganese Phosphate.

FC06 - T-Slot Nut (Milled)

Matlock Industrial Cupboards and Lockers

Matlock industrial steel storage cupboards provide strong secure storage. All cupboard components are manufactured from mild steel with an attractive paint finish. The loading capacity for each shelf is a maximum of 85kg UDL*.


*Uniformly Distributed Load.

Industrial Steel Utility Cupboard

The Matlock industrial steel utility cupboard has a useful combination of shelves and garment storage, created by a central partition. One side has three adjustable shelves while the other has a single shelf with hanging rail.


Dimensions (H x W x D): 1780 x 980 x 460mm.

Cupboard housing is painted silver.
Available with the following door colours: blue, green, red, silver, white or yellow*.
Please refer to the PDF of the catalogue for Order Codes.

*Other colours available on request.

Door colours not illustrated in picture, please refer to product title.

Kennedy® Serrated Soft Jaws

BSW serrations. To suit inch serrated Coventry/Tudor manual chucks.

3 Jaw Sets

Standard

Scantool Guillotine Shear

Manual back gauge with mm counter. Illumination of cutting edge. Safety equipment in accordance with CE. 600mm table extensions. Self-lubricating guides. Double eccentric drive on the cutter bar. Rubber-coated sheet holder. Low knife angle and burr-free cutting. Angle stop. Special equipment. Cutting counter. Motorised back gauge. Sheet catcher. Special blades for cutting stainless steel sheets. Table extension and angle stop with millimetre gauge and tilt stop. Adjustable angle stop with millimetre gauge and tilt stop.
Cutting Capacity (Width x Thickness): 1030 x 2.00mm
Cutting Angle: 3
Backguage: 550mm
Side Stop: 200mm
Blade Style: Plain
Weight: 280kg

TSP 1050

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.

FC07 - Engineers Stud