Support Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 38. Surface Finish: Manganese Phosphate

SC10 - Extension Pillar

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Modular Coolant Hose System

Threaded fitting 1/4 turn

Metal Ball Valves

Threaded fitting 1/4 turn.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Label Holders for Matlock? Plastic Storage Bins

These plastic label holders fasten over the front of the Matlock™ storage bins so that an identification label can be displayed for the contents of the storage bin.

Kennedy® Serrated Soft Jaws

To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc).

3 Jaw Sets

Chuck Keys

Suitable for use with all industrial keyed chucks.

Archive Bays

Simple, strong and excellent value document storage bays offer easy record storage and retrieval. Assembles in minutes without nuts, bolts or rivets. Prices include boxes. Bays comprise of 4 uprights in choice of 3 colours, 3 shelf levels with 18mm FSC compliant chipboard supported by light grey channel and metal footplates. Assembly instructions included. Maximum shelf load 210kg.

Kennedy® Abrasive Wheel Dressers

Conventional abrasive wheels need truing and regularly dressing to maintain a quality grinding performance, Kennedy single point diamond dressing tools have a single industrial diamond embedded in a cylindrical steel shaft they are suitable for performing both of these applications:

Truing is the process of aligning the periphery of the grinding wheel so that it runs concentric with its axis of rotation. This allows accurate and precise relative motion between the grinding wheel and the part being ground.

Dressing removes dulled abrasive and foreign material that has been embedded into the wheel. This allows the wheel to cut properly. Kennedy diamond dressing tools are mainly used to true straight-faced grinding wheels.

Single-Point Diamond Dressing Tool

Available with in a range of Diamond Carats, all with 13x150mm (1/2”x6”) Diameter x Length steel shafts:

0.50 Carat Order Code: KEN-496-0050K.
0.75 Carat Order Code: KEN-496-0070K.
1.00 Carat Order Code: KEN-496-0100K.
1.50 Carat Order Code: KEN-496-0150K.
2.00 Carat Order Code: KEN-496-0200K.

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 800 x 650mm (W xD)

8 Compartment