Heavy Duty Tool Storage System

Heavy duty industrial cupboards with double locking doors. Finished in epoxy powder coat RAL7035 with doors in blue RAL5010. Perforated door liners will accept tool holders. Security is ensured by a 3 point locking system. Shelves and drawers are adjustable on a 25mm pitch. Drawer dividers are available separately. Load capacity per shelf 100kg. 75kg U.D.L. capacity per drawer with 100% extension slides. Overall load capacity 1.5 ton.
Dimensions (W x D x H): 1050 x 650 x 2000mm.

Complete with Full Perforated Backpanel

Supplied with basic 2m high cupboard and two perforated door liners as standard.

Workshop Computer Workstations

650/1000mm wide x 550mm deep lockable cupboards with cable routing apertures. Lockable slide out keyboard tray, slide out shelf - ideal for printers (650mm wide model only). Static shelf, adjustable on 25mm pitch with 50kg UDL. Lockable ventilated monitor housings, sloping writing surface (1000mm wide models only).

Enclosed Top Workstation

TFT model for flat screen moniters.

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Fixture Components

Material: Body - Medium Carbon Steel EN198. Ball - Through Hardened Steel EN 31. Hardness: Body - HRC 32 - 38. Ball - HRC 62. Surface Finish: Ball - Hardened and Ground

FC16 - Clamp Set Screw

Ball Point

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ louvred panels are manufactured from pressed steel with high frequency louvres that will accept most makes of plastic storage bin. The high frequency of the louvres allows storage bins to be hung in a high-density configurations in any mix of sizes/colours. The lip on the rear of the plastic storage bin sits securely over the louvre of the panel. The modular design allows storage bins to be easily removed/ replaced when required.

Colour grey.

For all dimensional specifications and accessories please refer to our catalogue.

Steel Louvred Panel

Vertical Industrial Clamps

Features: Comfortable, cushioned PVC orange handle grips. Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use, the rivets of the larger clamps rotating in hardened bushes or directly in the close-toleranced holes of hardened parts.

Kennedy® Drill Drifts

To release Morse Taper Tooling without damaging machine socket or tools.

Matlock™ Industrial Racking and Shelving

Matlock™ QuickRack industrial racking and shelving is a flexible, simple and cost effective solution to your storage problems. Assembly of the shelving couldn't be simpler, simply slot and tap the frame work together as there are no fiddly nuts and bolts. Each shelving bay is supplied with 18mm thick shelves, extra shelves are available on request, allowing you to design shelving bays to suit your specific space/storage requirements.

QuickRack Heavy Duty Shelving Bay 1980x2400x600mm (HxWxD)

Matlock™ QuickRack industrial heavy duty racking and shelving is ideal for medium to heavy weight storage of tools and components.

Contents: 4 uprights. 3 shelf levels with channel shelf support beams. Support feet and assembly instructions. Maximum load per shelf: 445Kg

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Heavy Duty Mobile Cabinets

Mobile cabinets for on-site storage. Centrally lockable and finished in epoxy powder coat RAL7035/RAL5010. Designed with safety in mind, features include: Push/pull handle. 125mm castor set 300kg capacity (2 fixed, 2 swivel as standard & brake).
Anti roll off top tray and mat. Drawer blocking mechanism to prevent tipping. Safety trigger on each drawer to prevent accidental opening. 75kg U.D.L. capacity per drawer with 100% extension slides.

525 x 525mm (W x D)