Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Modular Coolant Hose System



Nozzles

Spray 90°, Flare, Pointed Straight, Pointed 90°

Indexa Drill Press Vices

Available in 4 different styles and various jaw widths. For drilling, light milling, vertical and horizontal work. Bearing mounted knurled handle to give optimum gripping power, smooth action and extended service life. One grooved and one plain replaceable jaw for square and hexagonal shapes across flats or corners, thin strips and discs. Jaws and lead screw are hardened and ground.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Inch Sizes

Fixture Components

Material: Medium Carbon Steel. Surface Finish: Manganese Phosphate.

FC40 - T-Slot Bolt

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

Matlock Shelving and Racking

This is the heaviest duty Matlock all steel shelving/racking system available. The steel shelf panels have a massive 1,165kg UDL* capacity per shelf it is ideal for storage of large, heavy items (18 or 25mm chipboard shelves also available please contact us for prices)

Features include:
Open construction allows access from both sides.
High quality paint finish.
Up to 1,165kg UDL* capacity per shelf.
Self assembly Tools Required.

Please refer to the catalogue PDF for all dimensional information.


*Uniformly Distributed Load.

Longspan Heavy Duty Racking

Stainless Steel Shim

Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.

Louvred Cupboards

These heavy duty cupboards provide a strong and secure component store. The back panel and inner doors are louvred to accept plastic bins. The cupboard is offered empty or as standard kits complete with bins as shown.
Dimensions (W x D x H): 1000 x 600 x 2000mm.

Louvred Cupboard plus 154 Bin Kit

154 bins: 8 x No 1, 114 x No 2, 20 x No 3, 12 x No 4.