Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.

FC07 - Engineers Stud

Interchangeable Insert Centres

For greater flexibility. Bodies and points manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

Insert Extractor tool

Matlock Industrial Cupboards and Lockers

Matlock industrial steel storage cupboards provide strong secure storage. All cupboard components are manufactured from mild steel with an attractive paint finish. The loading capacity for each shelf is a maximum of 85kg UDL*.


*Uniformly Distributed Load.

Compact Industrial Steel Cupboard

The Matlock compact industrial steel cupboard is supplied complete with one adjustable shelf, extra shelves available on request.

Dimensions: 1015x915x460mm (HxWxD)

Cupboard housing is painted silver.
Available with the following door colours: blue, green, red, silver, white or yellow*.
Please refer to the PDF of the catalogue for Order Codes.

*Other colours available on request.

Door colours not illustrated in picture, please refer to product title.

Fixture Components

Material: Medium Carbon Steel EN19B. Hardness: HRC 32 - 38. Serrated Surface: Induction Hardened.Surface Finish: Manganese Phosphate.

FC19 - Grip Head Screw

Toggle Clamp Spares

As Neoprene capped but suitable for clamping onto irregular shapes or angled workpieces.

Swivel Foot Spindles

Modular Coolant Hose System



Modular Manifold Kits

Allows a single line of coolant hose to be split off into four separate supplies.

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Kennedy® Standard Duty Revolving Centres

Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Maximum Runout: No 1 to 4 taper: 0.005mm, No 5 to 6 taper: 0.010mm.

Modular Coolant Hose System



Junction Pieces

Y-Redycer, Adaptor

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.