Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Vertical Industrial Toggle Clamps

Atlas? Workholding AV90-FA Vertical Industrial Toggle Clamp

Capacities:
Holding capacity: 90kg
Movement: handle: 60. bar: 100.
Adjustable ''U'' bar type.
Bolt retainer M6 x 60
Side facing flanged base.
Weight: 115g

For all dimensional specifications please refer to our catalogue.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's push pull toggle clamps have a straight-line action that allow these plunger-style clamps to exert extremely high loading capacities whilst maintaining compactness.

The clamps will also lock in the open position, which allows a 'pull' to be exerted for example, in use with foam moulds. All models have tapped spindles for use with adjustable spindles.

The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Push Pull Industrial Toggle Clamps

Atlas? Workholding AP200 Push Pull Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 200Kg.
Spindle thread: M8 x 1.25
Handle Movement: 150.
Handle position: 45 extended.
Flat flanged base.
Weight: 330g

For all dimensional specifications please refer to our catalogue.

Step Clamp

Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

Atlas? T-Slot Steel Clamping Sets

Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

58 Pieces Imperial Sets

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Vertical Industrial Toggle Clamps

Atlas? Workholding AV150-FA Vertical Industrial Toggle Clamp

Capacities:
Holding capacity: 150kg
Movement: handle: 70. bar: 108.
Adjustable "U" bar type.
Bolt retainer: M6 x 60
Flat flanged base.
Weight: 230g

For all dimensional specifications please refer to our catalogue.

Bench Shears

Hand operated, compound lever action bench shears. Capable of rapidly cutting through metal plate, strip and bar. Solid steel frame for rigidity and strength. With hardened and precision ground blades for accurate cutting. Adjustable blade guard.



Dimensions (WxHxD): 370x370x150mm.
Weight: 19Kg.

Atlas? Swivel Base Vices

Plain jaw milling machine vices are used for holding work that has parallel sides. The swivel base is graduated in degrees and allows the vice to swivel in the horizontal plane. The swivel base gives the vice a greater degree of versatility, but should be avoided when carrying out heavy rough cutting operations because it reduces the rigidity of the setup. Manufactured in accordance with stringent quality criteria and moving parts are tested for parallelism and perpendicularity in no less than eight tests - all to minute tolerances. All models are designed for milling, planing and drilling applications and are available with or without swivel bases.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's push pull toggle clamps have a straight-line action that allow these plunger-style clamps to exert extremely high loading capacities whilst maintaining compactness.

The clamps will also lock in the open position, which allows a 'pull' to be exerted for example, in use with foam moulds. All models have tapped spindles for use with adjustable spindles.

The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Push Pull Industrial Toggle Clamps

Atlas? Workholding AP136 Push Pull Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 136Kg.
Spindle thread: M8
Handle Movement: 180.
Handle position: 45 extended.
Flat flanged base.
Weight: 285g

For all dimensional specifications please refer to our catalogue.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Horizontal Industrial Toggle Clamps

Atlas? Workholding AH80-FA Horizontal Industrial Toggle Clamp.

Capacities:
Holding capacity: 80kg
Movement: handle: 60. bar: 85.
Adjustable ''U'' bar type.
Tipped spindle M6.
Flat flanged base.
Weight: 130g

For all dimensional specifications please refer to our catalogue.

Spare Jaws to Suit Atlas Machine Vices

Hardened and precision ground finished parallel vice jaws for Atlas machine vices.