Atlas? Precision Toolmakers Vices

Manufactured from high carbon steel, precision ground on all faces. Phosphor bronze bush, 90 vee on clamping jaws.

Standard Precision Toolmakers Vices

Jaw hardness HRC 58-62. Squareness and parallelism to within 0.005mm.

Bench Shears



Replacement Parts

Replacement Handle

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Vertical Industrial Toggle Clamps

Atlas? Workholding AV450-FA Vertical Industrial Toggle Clamp

Capacities:
Holding capacity: 450kg
Movement: handle: 70 bar: 135.
Adjustable "U" bar type.
Bolt retainer M12 x 120
Flat flanged base.
Weight: 1220g

For all dimensional specifications please refer to our catalogue.

Atlas? Swivel Base Vices

Plain jaw milling machine vices are used for holding work that has parallel sides. The swivel base is graduated in degrees and allows the vice to swivel in the horizontal plane. The swivel base gives the vice a greater degree of versatility, but should be avoided when carrying out heavy rough cutting operations because it reduces the rigidity of the setup. Manufactured in accordance with stringent quality criteria and moving parts are tested for parallelism and perpendicularity in no less than eight tests - all to minute tolerances. All models are designed for milling, planing and drilling applications and are available with or without swivel bases.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's push pull toggle clamps have a straight-line action that allow these plunger-style clamps to exert extremely high loading capacities whilst maintaining compactness.

The clamps will also lock in the open position, which allows a 'pull' to be exerted for example, in use with foam moulds. All models have tapped spindles for use with adjustable spindles.

The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Push Pull Industrial Toggle Clamps

Atlas? Workholding AP227 Push Pull Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 200Kg.
Spindle thread: M8 x 30 deep
Handle Movement: 190.
Handle position: 45 extended.
Flat flanged base.
Weight: 540g

For all dimensional specifications please refer to our catalogue.

Step Clamp

Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Horizontal Industrial Toggle Clamps

Atlas? Workholding AH217-FA Horizontal Industrial Toggle Clamp.

Capacities:
Holding capacity: 217kg
Movement: handle: 65. bar: 90.
Adjustable ''U'' bar type.
Tipped spindle M8.
Flat flanged base.
Weight: 312g

For all dimensional specifications please refer to our catalogue.

Atlas? Swivel Base Vices

Plain jaw milling machine vices are used for holding work that has parallel sides. The swivel base is graduated in degrees and allows the vice to swivel in the horizontal plane. The swivel base gives the vice a greater degree of versatility, but should be avoided when carrying out heavy rough cutting operations because it reduces the rigidity of the setup. Manufactured in accordance with stringent quality criteria and moving parts are tested for parallelism and perpendicularity in no less than eight tests - all to minute tolerances. All models are designed for milling, planing and drilling applications and are available with or without swivel bases.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's latch clamps are suitable for sealing chamber doors and mould closures the latch bolts are threaded to allow easy adjustment and provide positive connection with the latch plate. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Latch Type Industrial Toggle Clamp

Atlas? Workholding AL165-FU Latch Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 165kg.
Drawing Movement: 30mm.
Drawing Adjustment: 9.9mm.
Flat flanged base.
Weight: 68g

For all dimensional specifications please refer to our catalogue.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Horizontal Industrial Toggle Clamps

Atlas? Workholding AH20-FA Horizontal Industrial Toggle Clamp

Capacities:
Holding capacity: 30kg
Movement: handle: 88. bar: 80.
Adjustable ''U'' bar type.
Tipped spindle M6.
Flat flanged base.
Weight: 100g

For all dimensional specifications please refer to our catalogue.