Atlas? T-Slot Steel Clamping Sets

Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

58 Pieces Imperial Sets

Step Clamp

Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's push pull toggle clamps have a straight-line action that allow these plunger-style clamps to exert extremely high loading capacities whilst maintaining compactness.

The clamps will also lock in the open position, which allows a 'pull' to be exerted for example, in use with foam moulds. All models have tapped spindles for use with adjustable spindles.

The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Push Pull Industrial Toggle Clamps

Atlas? Workholding AP200 Push Pull Type Industrial Toggle Clamp.

Capacities:
Holding capacity: 200Kg.
Spindle thread: M8 x 1.25
Handle Movement: 150.
Handle position: 45 extended.
Flat flanged base.
Weight: 330g

For all dimensional specifications please refer to our catalogue.

Atlas? Workholding Toggle Clamps

Atlas? Workholding's comprehensive range of fixed grip toggle clamps are suitable for many applications including clamping loads, holding components in jigs and fixtures and many more. Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of Atlas? toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production.

Low profile clamps suitable for use in general applications requiring increased access to the actual work piece.

Force applied downwards 90 to bar.

Vertical Industrial Toggle Clamps

Atlas? Workholding AV50-FA Vertical Industrial Toggle Clamp.

Capacities:
Holding capacity: 50kg
Movement: handle: 56 bar: 100.
Adjustable ''U'' bar type.
Bolt retainer: M5 x 50
Flat Flanged base.
Weight: 60g

For all dimensional specifications please refer to our catalogue.

Revolving Centres - Standard Duty

Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60 point. Maximum Runout: 0.005mm.

Bottom Blade

BOTTOM BLADE FOR ATL448-2000K SHEAR

Atlas? T-Slot Steel Clamping Sets

Designed to save set up time and solve most clamping problems. Manufactured to high standards. All step clamps are forged and hardened and the step blocks are made from high quality steel. All components (other than the studs) are heat treated and finished in black oxide. Available to suit a full range of metric and imperial T-Slot widths. Supplied in steel racks which can be wall mounted or fitted to workbenches for ease of storage (except M16 set which is supplied in wooden box).

58 Pieces Metric Sets

Step Clamp

Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

Atlas? Precision Toolmakers Vices

Manufactured from high carbon steel, precision ground on all faces. Phosphor bronze bush, 90 vee on clamping jaws.

Standard Precision Toolmakers Vices

Jaw hardness HRC 58-62. Squareness and parallelism to within 0.005mm.

Bench Shears



Replacement Parts

Replacement Handle