330 - Multi-Bond Structural Adhesives

For use where the gaps between parts are bigger (up to 0.4mm). Resists flex peel and shock loads. Suitable for ceramic, wood, steels, certain plastics and smooth concrete.

Loctite 3295 Structural Adhesive

High strength two-part acrylic adhesive for structural bonding of a wide range of substrates including plastic and metals. The two components are applied premixed from the dispenser and cures rapid on assembly of the joint.

495 - Low Viscosity Instant Adhesive

Thin easy flowing general-purpose instant adhesive. Suitable for close fitting small components and parts bonding on rubbers, plastics and metals. Anvailable in 20g and 50g.

Loctite 275 High Strength Threadlocking Compound

Loctite 275 High Strength High Viscosity Threadlocking Compound

Loctite A+B Dual Cartridge 50ml

Loctite Hysol 9483 A&B is a general purpose, 2K-Epoxy adhesive, suitable for bonding and putting where optical clarity and high strength are required. Ideal for bonding decorative panels and displays.

Working time: 25-60min.
Fixture time: 210min.
Viscosity in Pa-s: 7.
Tensile strength: 47N/mm².
Peel strength: 1.5N/mm.
Service temperature range: -50°C - +150°C.
Colour mix: ultra clear.

290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

Loctite 4062 - Instant Adhesive / Ultra Fast Curing

Ideal for highest speed bonding of plastic, Metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493.



Ideal for highest speed bonding of plastic, metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493.
Specifications: Operating Temperature: up to 80°C.
Fixture Time (on steel): 3-20sec.
Viscosity mPa.s: 2.
Especially for Metal/Plastics.

Loctite Power Flex Super Glue Gel 3gm

A non-drip adhesive specially formulated with rubber, for applications requiring some flexibilty and shock resistance. Ideal for overhead bonding, vertical and porus surfaces. Water resistant.

Toughened Epoxy

Good gap fill. High peel strength. Fixture time 4 hours.

Hysol 9461