603* - General Purpose Retainer

Can replace or reinforce interference fits, pins, splines, keys and screws, giving slip fitted parts with a 0.1mm diametrical clearance greater push out resistance. * Replaces 601.

330 - Multi-Bond Structural Adhesives

For use where the gaps between parts are bigger (up to 0.4mm). Resists flex peel and shock loads. Suitable for ceramic, wood, steels, certain plastics and smooth concrete.

7031 Quick Clean

Neutralises acidic surfaces on the work surface and removes alkaline deposits left by soda or ammonia based solutions which weaken the bond of the adhesive.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

278 High Strength Oil Tolerant Threadlocker

Invented by Henkel Loctite as a revolutionary method to lock and seal threaded fasteners, Loctite Threadlockers have found wide acceptance in a range of applications - from delicate electronic components to heavy construction equipment. Loctite Threadlockers are available in varying viscosities and strengths for virtually any application, including exposure to extreme environments.



High strength threadlocker which can be used on as received parts and on applications where operating temperatures can reach 200C. It is also ideal for use on plated bolts including the new zinc/trivalent chrome finishes.

648 - Engineering Adhesive

Suitable for use at continuous working temperature of up to 175C. Can fill gaps of up to 0.15mm. High shear strength, medium viscosity and solvent resistant.

Instant Adhesive

Black, toughened adhesive. For small metal parts where the bond must endure heavy peel loads.

480 - Toughened

Economy Applicator Guns

For all Araldite cartridges except 2014.

Evo-Bond PVA

Evo-Bond will bond most building materials provided that one has a degree of porosity. Suitable for a variety of applications including bonding, priming and as admixtures. Evo-Bond may also be used as a dust sealer. Excellent primer, bonds to most building surfaces and improves adhesion.

3M? Scotch-Grip? Plastic Adhesive 1099

3M?Scotch-Grip? Plastic Adhesive 1099 is a medium viscosity grade for most brush or flow applications. High strength, fast drying elastomer bonds many plastics to themselves and other materials such as wood and metal.
Features:
* Resists weathering, water, oil, plasticiser migration, and aliphatic fuels
* Can be heat cured for increased assembly speed
* Very low VOC formulation with 32% solids
Meets requirements of MIL-A-13883B, Type I and MMM-A-189C, Class 2

Available in a 150ml tube, 1 Ltr and 5 Ltr tins.