Loctite 4062 - Instant Adhesive / Ultra Fast Curing

Ideal for highest speed bonding of plastic, metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493. Available in 20g or 50g.

Specifications: operating temperature up to 80°C.
Fixture time (on steel): 3-20sec.
Viscosity mPa.s: 2.
Especially for metal/plastics.

Instant Adhesive

A high viscosity ethyl cyanoacrylate adhesive for general- purpose bonding of rubber, plastic and metal. Replaces 415, 416 and 422.

431 - High Viscosity

Medium Strength Threadlocker

Medium and high strength threadlockers that once cured offer excellent resistance against most industrial chemicals. They achieve good thermal resistance, withstanding continuous operating temperatures up to 150C. Both of these products retain the customary high Loctite performance with a "white" bill health and safety bill meaning no hazard symbols, no risk phrases and ultimately no need for COSHH assessment.

N.B. 2400 (medium strength) and 2700 (high strength) threadlockers illustrated.

2400

2400: Medium strength threadlocker Loctite that is fluorescent blue with a viscosity of 3000 mPas and a shear strength on steel of 9 N/mm.

Clear Epoxy

Fast cure. Ultra clear. Toughened. Water resistant. Fixture time 12 minutes.

Hysol 3430

603* - General Purpose Retainer

Can replace or reinforce interference fits, pins, splines, keys and screws, giving slip fitted parts with a 0.1mm diametrical clearance greater push out resistance. * Replaces 601.

Instant Adhesive

Low viscosity instant adhesive designed for bonding metal, rubber and plastics. Excellent peel, impact and sheer strength.

435 - Low Viscosity

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

Instant Adhesive

General purpose, for metals.

496 Medium Viscosity.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.