Adhesive Mounting Spray

Multi-purpose adhesive - high coverage with low soak-in. Fast aggresive tack that securely bonds lightweight materials, eg. film, foils and fabrics. Suitable for use on expanded polystyrene foam without meltdown. Can be applied to either one or two surfaces. Comparative bond strength: medium. Particle spray pattern. Bonding range: 1 surface - 30 seconds to 15 minutes; 2 surfaces - 30 seconds to 30 minutes.

3M-77 General Purpose Bonding Adhesive

770 Polyolefin Primer

Materials such as polypropylene, polyethylene, and thermoplastic rubber are normally difficult to bond. This material makes them suitable for bonding with Loctite cyanoacrylate adhesives.

648 - Engineering Adhesive

Suitable for use at continuous working temperature of up to 175C. Can fill gaps of up to 0.15mm. High shear strength, medium viscosity and solvent resistant.

Araldite 2-Part Adhesive

Repairs metal, wood, masonry, ceramics, glass and most plastics. Oil, heat and cold resistant with a good chemical resistance. Fills uneven cracks and withstands rough handling.

Rapid

Quick setting and sets in minutes.

Epoxy Express Syringe

• Gives a strong, long lasting bond and sets clear in seconds.
• Ideal for glass and ceramics.
• Ideal for fixing uneven breaks on most materials.
• Syringe enables equal amounts of resin and hardener to be dispensed and features a resealable cap.
• 25ml syringe.

Loctite Peristaltic Dispensing Pump - 97001

A manually operated volumetric peristaltic bottle-top applicator that mounts easily on any Loctite 250ml bottle. It ensures no leakage, regardless of the orientation of the bottle, minimises waste and converts the product package into a portable dispenser. Especially useful for applications where freedom from product feed-lines is desirable. (Not suitable for use with 50ml bottles.)

3M? Scotch-Grip? Plastic Adhesive 1099

3M?Scotch-Grip? Plastic Adhesive 1099 is a medium viscosity grade for most brush or flow applications. High strength, fast drying elastomer bonds many plastics to themselves and other materials such as wood and metal.
Features:
* Resists weathering, water, oil, plasticiser migration, and aliphatic fuels
* Can be heat cured for increased assembly speed
* Very low VOC formulation with 32% solids
Meets requirements of MIL-A-13883B, Type I and MMM-A-189C, Class 2

Available in a 150ml tube, 1 Ltr and 5 Ltr tins.

Araldite 2-Part Adhesive

Repairs metal, wood, masonry, ceramics, glass and most plastics. Oil, heat and cold resistant with a good chemical resistance. Fills uneven cracks and withstands rough handling.

Rapid

Quick setting and sets in minutes.

Bostik High Performance Neoprene Adhesive - 2402

Two part adhesive ideal for rubber such as inflatables or wet suits. Use 9252 primer when bonding rubber to metal.

326 - Rapid Cure Structural Adhesives

For joining flat faces of rigid, close fitting metal and glass. Moisture and solvent resistant.