Impact Adhesive

Ideal for producing a strong bond on contact, without the need for jigs, clamps or weights.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

Timebond Adhesive

High strength thixotropic non-drip contact adhesive. Bonds in seconds. Allows slight adjustment on initial contact.



Evo-Stik Timebond is a general-purpose, thixotropic, non-drip contact adhesive, which is clean, and easy to apply, being non-drip it is ideal for use on vertical as well as horizontal surfaces. The resultant bonds give excellent bond strength and good temperature resistance.

Double Bubble Epoxy Adhesive

Will bond to a wide variety of materials (i.e. wood, metal, plastic and ceramic) and cures rapidly to give handling strength in approximately 5 minutes. Packed into a handy sachet, and supplied complete with a mixing stick and pallet for fast and effective repair work.
Pack size: 50 x 3g.

Araldite® HV998 Hardener 400gm

Hardener HV998 with Araldite AV138M is a two component, room temperature curing paste adhesive of high strength and toughness. Araldite AV138M sold separately.
When fully cured the adhesive will have excellent performance at elevated temperatures and has high chemical resistance. It is suitable for bonding a wide variety of metals, ceramics, glass, rubbers, rigid plastics and other materials, and is widely used in many industrial applications where resistance to aggressive or warm environments are required. The low out gassing makes this product suitable for specialist electronic telecommunication and aerospace applications.

Low out gassing / volatile loss.
Excellent chemical resistance.
Temperature resistant to 120°C.
Cures at temperatures down to 5°C.
Thixotropic, gap filling paste.

Hybrid Glue

Extra strong, versatile solution that combines the characteristics of an epoxy with a multi-purpose glue. Shock, temperature and water resistant, repositionable (5 minutes) and flexible, transparent and solvent free.



• Shock resistant
• Flexible
• Water resistant
• Temperature resistant
• Repositionable (5 minutes)
• Transparent
• Solvent free

Artists Spray Adhesives

Non-permanent adhesive for use with artwork, photographs etc. Allows for repositioning. Improved spray pattern for reduced overspray and easier application.

Spray Mount?

648 - Engineering Adhesive

Suitable for use at continuous working temperature of up to 175C. Can fill gaps of up to 0.15mm. High shear strength, medium viscosity and solvent resistant.

Loctite Peristaltic Dispensing Pump - 98414

A manually operated volumetric peristaltic bottle-top applicator that mounts easily on any Loctite 50ml bottle. It ensures no leakage, regardless of the orientation of the bottle, minimises waste and converts the product package into a portable dispenser. Especially useful for applications where freedom from product feed-lines is desirable. Can also be used with 250ml bottles by removing the base stand.

Instant Adhesive

For electronic/gauging assemblies where fumes can be a problem and where an unmarked appearance is critical.
Health and Safety friendly.

460 - Low Odour, Low Bloom