产品 / 切削工具
编号:AME1551240R
●产品描述:
Allied Maxcut Series 2 and 2.5 Holders
Diameter range: 24.41 to 35.05mm.
For all dimensional specifications please refer to our catalogue.
Taper Shank
编号:KEN1611012K
●产品描述:
Kennedy® Long Series Slot Drills Plain Shank Carbide Micrograin
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.
For all dimensional and technical specifications please refer to our catalogue.
Long Series 2 Flute Slot Drills - Metric

编号:SHR0850220D
●产品描述:
Sherwood Taps
Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.
Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.
Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.
Thread Forms are Class 2 medium fit tolerance.
For all technical and dimensional specifications please refer to our catalogue.
Tap Set Metric Fine Straight Flute Ground Thread HSS
Sherwood HSS taper taps are used to start cutting the thread they is tapered back from the end 6 to 10 threads before a fully threaded diameter is reached this allows the tap to be positioned easily and correctly before it starts to cut the thread.
The Second tap is used after the taper tap has cut threads into the hole as far as possible. It tapers back 3 or 4 threads before full thread diameter is reached.
The Plug tap cuts threads to the bottom of a blind hole. It is only necessary to use the full set of taps when a blind hole is to be tapped.
Each set of Sherwood taps contain one taper, second and plug lead tap.
编号:PNZ1775450K
●产品描述:
Pinzbohr Shank Extensions
For all dimensional specifications please refer to our catalogue.
编号:DOR0252565M
●产品描述:
Dormer Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series A130 (MT1) - Metric
编号:SNK1020972J
●产品描述:
Sandvik Coromant CoroDrill 880 Drill Bodies
Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.
For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.
Cylindrical shank - flat according to ISO 9766.
CoroDrill 880 Drill Bodies
编号:SHR0251485W
●产品描述:
Sherwood Long Series Drills Steam Tempered HSS
General-purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, web thickness: normal, relief angle: 10-20, tolerance of diameter: h8, tolerance of f11. Manufactured to BS328;Part 1:1986, DIN340RN, ISO494.
For all dimensional specifications please refer to our catalogue.
Series L100 - Metric
编号:SEN0250001D
●产品描述:
Senator® Jobber Drills HSS Roll Forged
Senator® jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required. Manufactured to BS 328 : Part 1 : 1986 & DIN 338 Type N.
编号:SHR0250228S
●产品描述:
Sherwood Jobber Drills Steam Tempered HSS
Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.
Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.
Series J100
编号:IDX1449170K
●产品描述:
Indexa-Seiki Tapping Collets
Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.
For all dimensional and technical specifications please refer to our catalogue.
DIN SZ2