产品 / 切削工具
品牌
分类
白钢车刀
锉刀
对焊车刀
焊接车刀
机用带锯
建筑钻孔加工
铰刀
锯片/盘铣刀
开孔加工
孔口加工
螺纹断丝取出
螺纹加工刀具
手用锯条
手用修边器
数控车刀
数控刀具&附件
数控刀片
丝锥/板牙
套装钻孔加工
铣刀
钻孔加工
24mm HSS SC/SH T-SLOT CUTTER

24mm HSS SC/SH T-SLOT CUTTER

编号:SHR0616559K
●产品描述:
Sherwood T-Slot Cutters Threaded Shank HSS

Used for machining T-slots on slide tables, fixtures etc., to DIN 650. For milling structural, carburized and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2" have 6 flutes and 18mm and 5/8" upwards have 8 flutes. Made to DIN 851. Shank to DIN 1835/D. Flute form 12 RH/LH.

For all dimensional specifications please refer to our catalogue.

Metric sizes

496 7.32mm HSS-E INT M/CCHUCKING REAMER

496 7.32mm HSS-E INT M/CCHUCKING REAMER

编号:GUH0660732A
●产品描述:
Guhring Machine Chucking Reamers Intermediate Diameter HSS-E

Available in diameters ranging from 2mm to 10mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 and DIN 2172 section 1.

Shank diameter equals cutting diameter - 0.025mm.
dia 2.00 - dia 2.65 / dia 2.66 - dia 10.00 H9.

Diameter Tolerances (to H7)
Up to 5.5mm: plus 0.004mm minus 0.000mm
Above 5.5mm: plus 0.005mm minus 0.000mm.

Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

For all technical specifications please refer to our catalogue.



EP00 M16x2.00 6H HSS-XS1TIN SP/PT TAP

EP00 M16x2.00 6H HSS-XS1TIN SP/PT TAP

编号:DOR1853651L
●产品描述:
EP00 TiN DIN 371 Spiral Point Metric Taps

Titanium Nitride Finish
Tolerance: 6H



3810x27mmx4/6TPI INTENSSPRO M42 BANDSAW BLADE

3810x27mmx4/6TPI INTENSSPRO M42 BANDSAW BLADE

编号:STT0066026R
●产品描述:
M42 Bi-Metal Bandsaw Blades

Starrett Powerband Gladiator M42 is the ultimate competitor in bi-metal bandsaw blades, providing a universal solution with optimum efficiency in large production cutting operations. A high speed steel M42 cutting edge, incorporating a new tooth design with a positive rake angle and variable pitch, combine to give Powerband Gladiator? M42 the utmost in cutting performance and cost effectiveness.

Powerband Gladiator Welded Loops

Recommended applications for Starrett Powerband Gladiator M42 bandsaw blades:
- High production cutting, full range of steels from mild to stainless up to 45 HRC, nickel-based and non-ferrous alloys
Features and Benefits:
- New tooth design features triple-tempered
- M42 high speed steel with 8% cobalt
- Rockwell C67-69
- Up to 12 positive rake angle
- Fatigue resistant alloy steel backing strip
- High wear and heat resistance
- Variable pitch teeth reduce vibration for smooth, quick cutting
- Easy penetration, excellent chip clearance, reduced noise levels
- Improved surface finish
- Faster, straighter cuts
A108 2.00mm HSS JOBBER DRILL FOR STAINLESS STEEL

A108 2.00mm HSS JOBBER DRILL FOR STAINLESS STEEL

编号:DOR0251608F
●产品描述:
Dormer Jobber Drills for Stainless Steel HSS

Drills up to 4 x diameter. Split point. Point angle: 135. Manufactured to BS328, DIN338.

Series A108 - Metric

A100 11/32

A100 11/32" HSS S/S JOBBER DRILL

编号:DOR0251001Y
●产品描述:
Dormer Jobber Drills Steam Tempered HSS

Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN.

Black Finish (W-Finish)
This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

Series A100

1LB-08,2 INSERT DRILL HSS

1LB-08,2 INSERT DRILL HSS

编号:GRA1513578C
●产品描述:
Granlund Size 1 Insert Drills

Type LB HSS Tol. h8 flute 40mm.

When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.

For all technical specifications please refer to our catalogue.



5/16

5/16"x18 UNC BLUE RING SP/PT DIN371 HSS-EV TAP

编号:SWT1853111B
●产品描述:
Swiss+Tech® Production Taps

Swiss+Tech® production spiral point taps are for threading through holes.
Manufactured from HSS-EV with an oxidised finish
Taper lead to DIN form B.
(3.5 x P to 5.5 x P).
Tapping tolerance to 6H.

Manufactured to DIN 371/376

For all technical and dimensional specifications please refer to our catalogue.

Blue Ring Spiral Point UNC (Unified Coarse) Production Tap HSS-EV

3/8

3/8"x16 UN TiALN MAXTHREAD CARBIDE THREADMILL

编号:AME1841821Y
●产品描述:
Allied Maxcut Thread Mills

The MaxThread™ threadmill range is manufactured from solid carbide with ground helical flutes and a TiAlN coating as standard. These product have been designed for the low volume/low cost production environment, providing excellent performance at a competitive price. A helical flute design has been maintained across the MaxThread™ range to allow
for maximum production benefits and to negate the need for straight flute thread mills. A comprehensive range of thread forms and technical information further supports the programme.

Features and Benefits:
Helical flute which offers increased strength and rigidity when cutting forces are applied.
TiAlN coated for increased tool life over uncoated tools.
Extensive range of thread forms.
High quality for consistent predictable production.

UN Thread Mills

8.70mm HSS S/S L/S DRILL

8.70mm HSS S/S L/S DRILL

编号:SHR0251521K
●产品描述:
Sherwood Long Series Drills Steam Tempered HSS

General-purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, web thickness: normal, relief angle: 10-20, tolerance of diameter: h8, tolerance of f11. Manufactured to BS328;Part 1:1986, DIN340RN, ISO494.

For all dimensional specifications please refer to our catalogue.

Series L100 - Metric