Indexa-Seiki Indexable Tooling Spares

To suit lever lock external toolholders

Dormer Jobber Drills Solid Carbide

General-purpose carbide drills. 120 four-facet point for accurate centering and improved hole quality. Bright finish.

Series R100 - Metric

OSG Taps

OSG type 1066 machine taps are manufactured from 3% Vanadium Super Grade High Speed Steel. Increasing the vanadium content improves the toughness without making the tap brittle. This means the tap has a greater resistance to work generated heat, which prolongs the life of the cutting edge.

Spiral Flute taps are suitable for threading blind holes.

Manufactured to ISO 529: 1975.

For all technical and dimensional specifications please refer to our catalogue.

Spiral Flute Taps UNF (Unified Fine) HSS-EV

Dormer Metric Coarse HSS Ground Thread Taps

Series E500. Comply with IS529.

Taper, Second and Plug Taps (Set of 3 - Straight Flute)

Granlund HSS Size 1 Countersinks

Type TK. HSS. Tolerance x9 90.

Countersink TK with a diameter 50mm and larger are made with a driving lip. These sizes should be used in the appropriate type M holder.

For further specifications please refer to our catalogue.

Mitsubishi Indexable Milling Inserts

Grade Description: VP15TF (P15-P35/M15-M35/ K15-K30) PVD Miracle Coated Milling/Drilling Grade. Offers increased heat resistance and adhesion strength. For all Steels, Cast Irons and some Stainless Steel

SOMT Indexable Milling Insert

Chipbreaker: JH - Medium to Heavy cutting Breaker High accuracy molded type inserts. Strengthening of the cutter edge prevents chipping and thus fracturing.
1. Interrupted cutting.
2. Scaling.

Allied Maxcut Structural Steel High Performance Drill Inserts

The Structural Steel Drilling system combines the GEN3SYS High Penetration Drilling System and the flexible T-A replaceable Insert Drill System. Linked to dedicated holders these two systems provide the most comprehensive solution available for fast and accurate drilling in all grades of structural steel used in RSJs and ?I? section beams, including thin wall sections and plate.
Compatible with: Kaltenbach/APS - FICEP - Peddinghaus - Voortman

Combined Drill ?Range
Metric: 14 to 40mm
Inch 0.5625" to 1.5625"

Minimum to Maximum Drill Depth Range
35mm to 224mm
Straight or helical flute options up to 7 x drill ?Choice of high performance substrates and coatings
Range of insert geometries
Outstanding tool life
Dedicated holder ? for increased rigidity
Through body coolant

T-A1 and 1.5 Series Holder Range

SwissTech 4 Flute End Mills Plain Shank Q-Coat Carbide

Centre Cutting. To Manufacturers Standards. Cutting diameter to h10, Shank diameter to h6. 'Q-Coat' Coating has been specifically developed to give carbide cutters the 'edge' when faced with severe machining conditions. Materials up to 66 HRC. Dry cutting. Die and Mould machining. Reduced coolant usage and disposal. Up to 100% longer cutter life. Reduced manufacturing costs. A multi-layer coating capable of operating at higher speed and feed. Excellent oxidisation resistance. High speed machining. Surface hardness 3300HV. Surface coefficient against steel 0.25. Thickness of coating 305um. Maximum working temperature 850. Re-coating service also available.

For all technical and dimensional specifications please refer to our catalogue.

Series 68 EMQ-4PL Carbide Q-Coat

Dimensions to DIN 844.

HSS (SCD) Stub Centring Drills

Stub centering drills designed for sheet metal drilling and spot centering operations with a strong supporting web and a reduced chisel edge to help penetration.

135° Split Point - Series S510 - Inch

Guhring Machine Chucking Reamers Intermediate Diameter HSS-E

Available in diameters ranging from 2mm to 10mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 and DIN 2172 section 1.

Shank diameter equals cutting diameter - 0.025mm.
dia 2.00 - dia 2.65 / dia 2.66 - dia 10.00 H9.

Diameter Tolerances (to H7)
Up to 5.5mm: plus 0.004mm minus 0.000mm
Above 5.5mm: plus 0.005mm minus 0.000mm.

Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

For all technical specifications please refer to our catalogue.