Indexa-Seiki? Indexable Boring Bars

Indexa-Seiki??s range of indexable tooling includes, face mills, end mills, boring bars and turning toolholders. All Indexa-Seiki? indexable tooling is manufactured to recognised ISO standards to ensure that the insert is clamped securely in the toolholder or milling body. The exceptional stability of Indexa-Seiki? indexable tooling when in operation, ensures you achieve the precision that you require in the finished component, every time.

Indexable tooling is the modern solution for all machining applications as the carbide inserts held in indexable tool holders can be changed as required to machine different types of material, many inserts have multiple cutting faces, once one face is blunt simply rotate the insert in the toolholder this flexibility helps to eliminate expensive down time and regrinding costs helping you to increase production and drive down running costs.

We are confident that from our selection of indexable toolholders, you will find the tool appropriate to the machining operation you are carrying out.

A full range of spares are readily available for all Indexa-Seiki? Indexable Tooling, please refer to our catalogue for details.

For all technical and dimensional specifications please refer to our catalogue.

SCLCR Boring Bar

95 Approach for 7 positive 80 rhombic inserts

Indexa-Seiki ER - Collet Chucks

The Indexa-Seiki ER Collet chuck is manufactured as part of Europe's most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also available to give access into deep recesses. Balanced to 12,000rpm. Max Tir 0.010mm. (BT BT-MAS 403)



To BT-MAS 403

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

E2-3 Morse Taper Sleeves

Indexa-Seiki ER - Collet Chucks

The Indexa-Seiki ER Collet chuck is manufactured as part of Europe's most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also available to give access into deep recesses. Balanced to 12,000rpm. Max Tir 0.010mm. (BT BT-MAS 403)



To BT-MAS 403

Indexa-Seiki Tapping Collets

Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.

For all dimensional and technical specifications please refer to our catalogue.

DIN SZ1

Indexa-Seiki Indexable Tooling Spares

Within the Index-Seiki range of indexable tooling spares you will find insert screws, Torx keys, shims, clamps and pins to fit the Index-Seiki toolholder you're using.

Indexa-Seiki? Screw-On External Toolholders

For further technical and dimensional specifications please refer to our catalogue.

SDJC - Right Hand

93 Approach for 7 positive 55 rhombic inserts.

Indexa-Seiki? Screw-On External Toolholders

For further technical and dimensional specifications please refer to our catalogue.

SVVB N

72.5 Approach for 5 positive 35 rhombic inserts.

Indexa-Seiki Indexable Tooling Spares

To suit combination top clamp & pinlock external toolholders

Indexa-Seiki? Lever Lock External Toolholders

For further technical and dimensional specifications please refer to our catalogue.

PSSN - Right Hand

45 Offset Approach for negative square inserts.