产品 / 切削工具
编号：IDX1443500K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 1.0-16.
(D)26mm x (L)35mm.
ER25
编号：IDX1449234K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ1
编号：IDX1449318K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ2
编号：IND1443472K
●产品描述：
Indexa-Seiki SL - Sidelock Adaptors
For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.
Standard Length
To BT-MAS 403
编号：IDX1449316K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ2
编号：IDX1449168K
●产品描述：
Indexa-Seiki Tapping Collets
Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.
For all dimensional and technical specifications please refer to our catalogue.
DIN SZ2
编号：IND1482830K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2 Boring Bar Holders
编号：IDX1443800K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 2.0-20.
(D)33mm x (L)40mm.
ER32
编号：IND1481530K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
Radial
Short, Upside down B4 Left Hand
编号：IND1408115K
●产品描述：
Indexa-Seiki ER Spanners & Locknuts
Suitable for all collet chucks including straight shank.