产品 / 切削工具
编号：IND1448532K
●产品描述：
Indexa-Seiki Tapping Chucks - Rigid Type (No Compression)
With through coolant. Suitable for use on CNC machines set up for rigid tapping.
For all dimensional specifications please refer to our catalogue.
ISO/DIN 69871-A Taper Shank
编号：IND1449955K
●产品描述：
Indexa-Seiki Taper Shank Tool Banks
Tool blanks have hardened and ground shanks with a plain front end which is machinable, ideal for the production of special boring bars and adaptors. Other sizes are also available to special order.
BT BT-MAS 403 DN DIN 69871/A IS/QC ISO/DIN 2080
编号：IDX1443316K
●产品描述：
Indexa-Seiki ER Single-Angle Collets
Collet Dimensions:
Capacity 3.0-13.
(D)21mm x (L)31.5mm.
ER20
编号：IDX1449304K
●产品描述：
Indexa-Seiki Tapping Collets
Slipping clutch type. To suit Indexa-Seiki tension and compression type tapping chucks.
For all technical specifications please refer to our catalogue.
DIN SZ2
编号：IND1443506K
●产品描述：
Indexa-Seiki SL - Sidelock Adaptors
For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.
Standard Length
To BT-MAS 403
编号：IDX1449196K
●产品描述：
Indexa-Seiki Tapping Collets
Rigid type. To suit Indexa-Seiki Rigid type tapping chucks.
For all dimensional and technical specifications please refer to our catalogue.
ISO529 SZ2
编号：IND1397440K
●产品描述：
Indexa-Seiki? XP-45C ?Hi Shear? Milling Cutters
Super Positive 45 approach milling cutter, angle decreases cutting forces and allows a quick feed in a limited capacity machine. Torx screws allow for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.
编号：IND1444922K
●产品描述：
Indexa-Seiki FM - Face Mill Adaptors
From an extensive programme of quality spindle nose tooling, used with an extensive range of face and shell mills
编号：IND1444914K
●产品描述：
Indexa-Seiki FM - Face Mill Adaptors
From an extensive programme of quality spindle nose tooling, used with an extensive range of face and shell mills
编号：IND1483100K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
E2-1 Boring Bar Sleeves