产品 / 切削工具
编号：KEN1000230K
●产品描述：
Kennedy® Brazed Tip Turning and Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40:
Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30:
Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20:
General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
For all dimensional and technical specifications please refer to our catalogue.
P30 Straight Round Nosed Turning Tools
编号：KEN1618100K
●产品描述：
Kennedy® 4 Flute Double-Ended End Mills Plain Shank Solid Carbide Micrograin
For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Centre cutting. Manufactured to ANSI Standards.
For all technical and dimensional specifications please refer to our catalogue.
Regular Series 4 Flute Double End - Metric
编号：KEN1002180K
●产品描述：
Kennedy® Brazed Tip Turning and Boring Tools
Manufactured in three standard grades. (All sizes are nominal). Manufactured to ISO DIN BHMA Standards.
P40:
Roughing to heavy roughing of steel and steel castings using heavy feeds and low to medium cutting speeds. Also used under unfavourable conditions, particularly where intermittent cutting is involved. This grade is also suitable for planing operations and for machining manganese steel.
P30:
Carbide tipped tools are suitable for heavy duty turning and boring on all classes of steel. Suitable also for interrupted cutting and machining at low speeds and heavy feeds.
K20:
General-purpose tools for most applications. Ideal for machining cast iron, non-ferrous metals, bakelite etc. Combines wear resistance with toughness when rough turning at moderate cutting speeds. Suitable for high feed rates.
For all dimensional and technical specifications please refer to our catalogue.
Bar Turning Tools
Right Hand. Available in Grades P40, P30 and K20.
编号：KEN0106120K
●产品描述：
Butt-Welded Lathe Tools
Manufactured from top quality sintered steels. For use on a wide range of applications from roughing to finishing. Manufactured to BS1296:Part 3:1978.
For all dimensional and technical specifications please refer to our catalogue.
Right Angle Recessing - No.25 RH/No.26 LH
Rake and Clearance angles:
Top rake: 5.
Front clearance: 6.
Approach angle: 0.
Trail angle: 2.
Side clearance: 3.
编号：KEN0302310K
●产品描述：
Kennedy Engineers' Hand Files Industrial Quality
Engineers' Half Round Files have edges and surfaces that taper towards the point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Available as Smooth Cut, Second Cut and Bastard Cut.
Half Round
Smooth Cut
编号：KEN0573740K
●产品描述：
Kennedy SDS-Style Fitting Hammer Drill Bits
Kennedy Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.
SDS-Plus Hammer Drill Bit
编号：KEN1619020K
●产品描述：
Kennedy® Long Series Slot Drills Plain Shank Carbide Micrograin
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.
For all dimensional and technical specifications please refer to our catalogue.
Long Series 4 Flute Slot Drills - Inch
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Ansi Standards.
Inch Tolerances
Nominal Limits Of Tolerance
Diameter High Low
1/16 - 1/4 0.000 -0.002
17/64 - 1 0.000 -0.003
Metric Tolerances
Nominal Limits Of Tolerance
Diameter High Low
1 - 6 0.000 -0.050
7 - 25 0.000 -0.080
Long Series
编号：KEN0323030K
●产品描述：
Kennedy Rasps
Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.
Hand
Bastard Rasp Cut
编号：KEN0571820K
●产品描述：
Kennedy SDS-Style Fitting Hammer Drill Bits
Kennedy Tungsten carbide tipped SDS masonry drills are suitable for all SDS direct fitting hammer drills. High performance drill bits that withstand extreme heat generation ensuring maximum performance coupled with wear resistance. Manufactured to DIN 8035.
SDS-Plus Hammer Drill Bit
编号：KEN0561200K
●产品描述：
Kennedy High Performance Rotary Impact Drill Bits
Tungsten carbide tipped with fully ground flutes. Full flute width, tip seating and specially designed cutting angles. For rapid drilling of concrete, brick, masonry, etc. Suitable for both rotary and rotary-impact use. Manufactured to BS 5621: 1992, ISO 5468 : 1992.
Medium Length