Senator® Parts, Component and Tool Storage Bins

Senator® high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage.

The versatile Senator® storage bin can be stand alone, nested on top of each other or hung on louvred panels allowing you to create the storage system to satisfy your specific requirement.

Senator storage bins are available in 3 sizes and a choice of blue, green, yellow or red and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Size: 350 x 220 x 165mm.

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ hanging spigots for louvred panels are an ideal way to store awkwardly shaped parts or components on a louvred panel storage system.

All manufactured from steel with a corrosion resistant zinc plated finish.

Hanging Spigots for Louvred Panels

Toolholders for Quick Change Toolposts



Morse Taper Type

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 35. Surface Finish: Manganese Phosphate

CC24 - Speedy Lock

Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Matlock™ Plastic Storage Bin Size: No.3A Dimensions 350x280x184mm(LxWxH)

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Drill Sleeves

Clamp Fixture Components

Material: Case Hardened Steel. Hardness: HRC38-42. Surface Finish: Manganese Phosphate

CC08 - Swing Clamp

Vertical Industrial Clamp

Features: Comfortable, cushioned PVC orange handle grips. Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use, the rivets of the larger clamps rotating in hardened bushes or directly in the close-toleranced holes of hardened parts.